All content site-map & Search> Building plans> Building details> Cooking> Firing ovens> Food nutrients> Flour measures> Oven photos>

back to board Main Page

Re: Dome entry to dome percentage

From the WFO board

Posted by Rado

In Reply to: Dome entry to dome percentage posted by Evan

Evan,
Yes do 10 inch (254mm) entry as per the 63% oven internal vault height to entry height ratio. Exactly 10" (25.4cm) is shown on the low set Masterly Tail that sits on ground (it's on the MTo cdrom in separate folder.) If you do 11" (279.4mm) high entry in the tip of the entry arch the oven shows no difference in performance.

If it was needed to place larger pot or lamb spit or made up rotisserie inside etc.

Thank you to Eugene for his earlier reply to your post so you had his answers sooner.

by Rado Hand on Google+

Oven information

To link to traditional oven from your website, only cut and paste the following code into your web page.
It will appear as: traditional oven