Category: Precious-metals main menu • osmium menu • Taels
osmium conversion
Amount: 1.5 taels (tahil) of osmium mass
Equals: 4,793.59 solid ∅ 1 mm spheres (d, ∅ 1 mm) in osmium volume
Calculate solid ∅ 1 mm spheres of osmium per 1.5 taels unit. The osmium converter.
TOGGLE : from solid ∅ 1 mm spheres into taels in the other way around.
CONVERT : between other osmium measuring units - complete list.
Osmium Amounts (solid pure metal)
This calculator page for Osmium is based on the pure osmium with symbol OS and density of ≅ 23 grams per one cubic centimeter, calculated not measured, 22.59g/cm3 precisely. Osmium is the densest element that can be found in the nature. It is hard metal and it alloys with platinum plus other metals from the platinum group. The hardness and resistance to scratching of osmium could be compared with the hardness of synthetic diamonds or sapphire. For its hardness, durability and high-wear resistant properties osmium is used for making electrical contacts where long time continuous use is demanded; such as electromechanical relays and other switches applications where the material's wear-resistance is important. Old gramophone needles were made out of osmium in the past. Osmium as a metal isn't often used in it's pure form, unalloyed, because unfortunately this metal is quite toxic.
Convert osmium measuring units between tael (tahil) and solid ∅ 1 mm spheres (d, ∅ 1 mm) of osmium but in the other direction from solid ∅ 1 mm spheres into taels.
| conversion result for osmium: | |||||
| From | Symbol | Equals | Result | To | Symbol |
| 1 tael | tahil | = | 3,195.73 | solid ∅ 1 mm spheres | d, ∅ 1 mm |
Precious metals: osmium conversion
This online osmium from tahil into d, ∅ 1 mm (precious metal) converter is a handy tool not just for certified or experienced professionals. It can help when selling scrap metals for recycling.
Other applications of this osmium calculator are ...
With the above mentioned units calculating service it provides, this osmium converter proved to be useful also as a teaching tool:
1. in practicing taels and solid ∅ 1 mm spheres ( tahil vs. d, ∅ 1 mm ) exchange.
2. for conversion factors training exercises with converting mass/weights units vs. liquid/fluid volume units measures.
3. work with osmium's density values including other physical properties this metal has.
International unit symbols for these two osmium measurements are:
Abbreviation or prefix ( abbr. short brevis ), unit symbol, for tael is: tahil
Abbreviation or prefix ( abbr. ) brevis - short unit symbol for sphere 1 millimeter in diameter is: d, ∅ 1 mm
One tael of osmium converted to sphere 1 millimeter in diameter equals to 3,195.73 d, ∅ 1 mm
How many solid ∅ 1 mm spheres of osmium are in 1 tael? The answer is: The change of 1 tahil ( tael ) unit of a osmium amount equals = to 3,195.73 d, ∅ 1 mm ( sphere 1 millimeter in diameter ) as the equivalent measure for the same osmium type.
In principle with any measuring task, switched on professional people always ensure, and their success depends on, they get the most precise conversion results everywhere and every-time. Not only whenever possible, it's always so. Often having only a good idea ( or more ideas ) might not be perfect nor good enough solutions. Subjects of high economic value such as stocks, foreign exchange market and various units in precious metals trading, money, financing ( to list just several of all kinds of investments ), are way too important. Different matters seek an accurate financial advice first, with a plan. Especially precise prices-versus-sizes of osmium can have a crucial/pivotal role in investments. If there is an exact known measure in tahil - taels for osmium amount, the rule is that the tael number gets converted into d, ∅ 1 mm - solid ∅ 1 mm spheres or any other unit of osmium absolutely exactly. It's like an insurance for a trader or investor who is buying. And a saving calculator for having a peace of mind by knowing more about the quantity of e.g. how much industrial commodities is being bought well before it is payed for. It is also a part of savings to my superannuation funds. "Super funds" as we call them in this country.
List with commonly used tael (tahil) versus solid ∅ 1 mm spheres (d, ∅ 1 mm) of osmium numerical conversion combinations is below:
- Fraction:
- osmium 1/4 taels to solid ∅ 1 mm spheres
- osmium 1/3 taels to solid ∅ 1 mm spheres
- osmium 1/2 taels to solid ∅ 1 mm spheres
- osmium 2/3 taels to solid ∅ 1 mm spheres
- osmium 3/4 taels to solid ∅ 1 mm spheres
- Decimal:
- osmium 1 taels to solid ∅ 1 mm spheres
- osmium 1.5 taels to solid ∅ 1 mm spheres
- osmium 2 taels to solid ∅ 1 mm spheres
- osmium 2.5 taels to solid ∅ 1 mm spheres
- osmium 3 taels to solid ∅ 1 mm spheres
- osmium 3.5 taels to solid ∅ 1 mm spheres
- osmium 4 taels to solid ∅ 1 mm spheres
- osmium 4.5 taels to solid ∅ 1 mm spheres
- osmium 5 taels to solid ∅ 1 mm spheres
- osmium 5.5 taels to solid ∅ 1 mm spheres
- osmium 6 taels to solid ∅ 1 mm spheres
- osmium 6.5 taels to solid ∅ 1 mm spheres
- osmium 7 taels to solid ∅ 1 mm spheres
- osmium 7.5 taels to solid ∅ 1 mm spheres
- osmium 8 taels to solid ∅ 1 mm spheres
- osmium 8.5 taels to solid ∅ 1 mm spheres
- osmium 9 taels to solid ∅ 1 mm spheres
- osmium 9.5 taels to solid ∅ 1 mm spheres
- osmium 10 taels to solid ∅ 1 mm spheres
- osmium 10.5 taels to solid ∅ 1 mm spheres
- osmium 11 taels to solid ∅ 1 mm spheres
- osmium 11.5 taels to solid ∅ 1 mm spheres
- osmium 12 taels to solid ∅ 1 mm spheres
- osmium 12.5 taels to solid ∅ 1 mm spheres
- osmium 13 taels to solid ∅ 1 mm spheres
- osmium 13.5 taels to solid ∅ 1 mm spheres
- osmium 14 taels to solid ∅ 1 mm spheres
- osmium 14.5 taels to solid ∅ 1 mm spheres
- osmium 15 taels to solid ∅ 1 mm spheres
- osmium 15.5 taels to solid ∅ 1 mm spheres
- osmium 16 taels to solid ∅ 1 mm spheres
- osmium 16.5 taels to solid ∅ 1 mm spheres
- osmium 17 taels to solid ∅ 1 mm spheres
- osmium 17.5 taels to solid ∅ 1 mm spheres
- osmium 18 taels to solid ∅ 1 mm spheres
- osmium 18.5 taels to solid ∅ 1 mm spheres
- osmium 19 taels to solid ∅ 1 mm spheres
- osmium 19.5 taels to solid ∅ 1 mm spheres
- osmium 20 taels to solid ∅ 1 mm spheres
- osmium 20.5 taels to solid ∅ 1 mm spheres
- osmium 21 taels to solid ∅ 1 mm spheres
- osmium 21.5 taels to solid ∅ 1 mm spheres
- osmium 22 taels to solid ∅ 1 mm spheres
- osmium 22.5 taels to solid ∅ 1 mm spheres
- osmium 23 taels to solid ∅ 1 mm spheres
- osmium 23.5 taels to solid ∅ 1 mm spheres
- osmium 24 taels to solid ∅ 1 mm spheres
- osmium 24.5 taels to solid ∅ 1 mm spheres
- osmium 25 taels to solid ∅ 1 mm spheres
- osmium 25.5 taels to solid ∅ 1 mm spheres
- osmium 26 taels to solid ∅ 1 mm spheres
- osmium 26.5 taels to solid ∅ 1 mm spheres
- osmium 27 taels to solid ∅ 1 mm spheres
- osmium 27.5 taels to solid ∅ 1 mm spheres
- osmium 28 taels to solid ∅ 1 mm spheres
- osmium 28.5 taels to solid ∅ 1 mm spheres
- osmium 29 taels to solid ∅ 1 mm spheres
- osmium 29.5 taels to solid ∅ 1 mm spheres
- osmium 30 taels to solid ∅ 1 mm spheres
- osmium 30.5 taels to solid ∅ 1 mm spheres
- osmium 31 taels to solid ∅ 1 mm spheres
- osmium 31.5 taels to solid ∅ 1 mm spheres
- osmium 32 taels to solid ∅ 1 mm spheres
- osmium 32.5 taels to solid ∅ 1 mm spheres
- osmium 33 taels to solid ∅ 1 mm spheres
- osmium 33.5 taels to solid ∅ 1 mm spheres
- osmium 34 taels to solid ∅ 1 mm spheres
- osmium 34.5 taels to solid ∅ 1 mm spheres
- osmium 35 taels to solid ∅ 1 mm spheres
- osmium 35.5 taels to solid ∅ 1 mm spheres
- osmium 36 taels to solid ∅ 1 mm spheres
- osmium 36.5 taels to solid ∅ 1 mm spheres
- osmium 37 taels to solid ∅ 1 mm spheres
- osmium 37.5 taels to solid ∅ 1 mm spheres
- osmium 38 taels to solid ∅ 1 mm spheres
- osmium 38.5 taels to solid ∅ 1 mm spheres
- osmium 39 taels to solid ∅ 1 mm spheres
- osmium 39.5 taels to solid ∅ 1 mm spheres
- osmium 40 taels to solid ∅ 1 mm spheres
- osmium 40.5 taels to solid ∅ 1 mm spheres
- osmium 41 taels to solid ∅ 1 mm spheres
- osmium 41.5 taels to solid ∅ 1 mm spheres
- osmium 42 taels to solid ∅ 1 mm spheres
- osmium 42.5 taels to solid ∅ 1 mm spheres
- osmium 43 taels to solid ∅ 1 mm spheres
- osmium 43.5 taels to solid ∅ 1 mm spheres
- osmium 44 taels to solid ∅ 1 mm spheres
- osmium 44.5 taels to solid ∅ 1 mm spheres
- osmium 45 taels to solid ∅ 1 mm spheres
- osmium 45.5 taels to solid ∅ 1 mm spheres
- osmium 46 taels to solid ∅ 1 mm spheres
- osmium 46.5 taels to solid ∅ 1 mm spheres
- osmium 47 taels to solid ∅ 1 mm spheres
- osmium 47.5 taels to solid ∅ 1 mm spheres
- osmium 48 taels to solid ∅ 1 mm spheres
- osmium 48.5 taels to solid ∅ 1 mm spheres
- osmium 49 taels to solid ∅ 1 mm spheres
- osmium 49.5 taels to solid ∅ 1 mm spheres
- osmium 50 taels to solid ∅ 1 mm spheres
Oven info & galleries
- Home Page
- Oven building CDrom details
- Pizza ovens
- New gallery
- Oven meals
- Vintage forum
- Rectangle shape vs. round igloo
- Building details
- Refractory concrete
- Heat resistant mortar
- Concrete cladding layer
- Thermal insulation
- Fire-bricks
- Fire-clay
- Saving money & time
- Good thermometer
- Oven building 1
- Building oven 2
