Category: Precious-metals main menu • rhodium menu • Solid ∅ 1 mm spheres
rhodium conversion
Amount: 47 solid ∅ 1 mm spheres (d, ∅ 1 mm) of rhodium volume
Equals: 0.0081 taels (tahil) in rhodium mass
Calculate taels of rhodium per 47 solid ∅ 1 mm spheres unit. The rhodium converter.
TOGGLE : from taels into solid ∅ 1 mm spheres in the other way around.
CONVERT : between other rhodium measuring units - complete list.
Rhodium
Rhodium is one of the rarest precious metals and it belongs to a category of metals referred to as noble metals (all metals resistant to corrosion.) This calculator tool is based on pure rhodium (raw and solid rhodium volume). Until the recent 2010-12 rapid gold price hike, even when considering the relatively high recycling rate it has, rhodium used to be the most costly metal per ounce to buy. Apart that the prominent usage of this metal is in the automobile industry ( rhodium has advantage over other platinum metals in making catalytic converters for car engines ), jewelers electroplate rhodium on white-gold, platinum and sterling silver to achieve reflective flashy surface on a jewelry. Rhodium jewelery has higher value/appreciation if compared with all the other more common metals mentioned above.
It is possible to manage numerous rhodium wight vs volume units calculations on one page. The all in one Rh multiunit calculator makes it possible managing just that.
Convert rhodium measuring units between sphere 1 millimeter in diameter (d, ∅ 1 mm) and taels (tahil) of rhodium but in the other direction from taels into solid ∅ 1 mm spheres.
| conversion result for rhodium: | |||||
| From | Symbol | Equals | Result | To | Symbol |
| 1 sphere 1 millimeter in diameter | d, ∅ 1 mm | = | 0.00017 | taels | tahil |
Precious metals: rhodium conversion
This online rhodium from d, ∅ 1 mm into tahil (precious metal) converter is a handy tool not just for certified or experienced professionals. It can help when selling scrap metals for recycling.
Other applications of this rhodium calculator are ...
With the above mentioned units calculating service it provides, this rhodium converter proved to be useful also as a teaching tool:
1. in practicing solid ∅ 1 mm spheres and taels ( d, ∅ 1 mm vs. tahil ) exchange.
2. for conversion factors training exercises with converting mass/weights units vs. liquid/fluid volume units measures.
3. work with rhodium's density values including other physical properties this metal has.
International unit symbols for these two rhodium measurements are:
Abbreviation or prefix ( abbr. short brevis ), unit symbol, for sphere 1 millimeter in diameter is: d, ∅ 1 mm
Abbreviation or prefix ( abbr. ) brevis - short unit symbol for tael is: tahil
One sphere 1 millimeter in diameter of rhodium converted to tael equals to 0.00017 tahil
How many taels of rhodium are in 1 sphere 1 millimeter in diameter? The answer is: The change of 1 d, ∅ 1 mm ( sphere 1 millimeter in diameter ) unit of a rhodium amount equals = to 0.00017 tahil ( tael ) as the equivalent measure for the same rhodium type.
In principle with any measuring task, switched on professional people always ensure, and their success depends on, they get the most precise conversion results everywhere and every-time. Not only whenever possible, it's always so. Often having only a good idea ( or more ideas ) might not be perfect nor good enough solutions. Subjects of high economic value such as stocks, foreign exchange market and various units in precious metals trading, money, financing ( to list just several of all kinds of investments ), are way too important. Different matters seek an accurate financial advice first, with a plan. Especially precise prices-versus-sizes of rhodium can have a crucial/pivotal role in investments. If there is an exact known measure in d, ∅ 1 mm - solid ∅ 1 mm spheres for rhodium amount, the rule is that the sphere 1 millimeter in diameter number gets converted into tahil - taels or any other unit of rhodium absolutely exactly. It's like an insurance for a trader or investor who is buying. And a saving calculator for having a peace of mind by knowing more about the quantity of e.g. how much industrial commodities is being bought well before it is payed for. It is also a part of savings to my superannuation funds. "Super funds" as we call them in this country.
List with commonly used sphere 1 millimeter in diameter (d, ∅ 1 mm) versus taels (tahil) of rhodium numerical conversion combinations is below:
- Fraction:
- rhodium 1/4 solid ∅ 1 mm spheres to taels
- rhodium 1/3 solid ∅ 1 mm spheres to taels
- rhodium 1/2 solid ∅ 1 mm spheres to taels
- rhodium 2/3 solid ∅ 1 mm spheres to taels
- rhodium 3/4 solid ∅ 1 mm spheres to taels
- Decimal:
- rhodium 1 solid ∅ 1 mm spheres to taels
- rhodium 1.5 solid ∅ 1 mm spheres to taels
- rhodium 2 solid ∅ 1 mm spheres to taels
- rhodium 2.5 solid ∅ 1 mm spheres to taels
- rhodium 3 solid ∅ 1 mm spheres to taels
- rhodium 3.5 solid ∅ 1 mm spheres to taels
- rhodium 4 solid ∅ 1 mm spheres to taels
- rhodium 4.5 solid ∅ 1 mm spheres to taels
- rhodium 5 solid ∅ 1 mm spheres to taels
- rhodium 5.5 solid ∅ 1 mm spheres to taels
- rhodium 6 solid ∅ 1 mm spheres to taels
- rhodium 6.5 solid ∅ 1 mm spheres to taels
- rhodium 7 solid ∅ 1 mm spheres to taels
- rhodium 7.5 solid ∅ 1 mm spheres to taels
- rhodium 8 solid ∅ 1 mm spheres to taels
- rhodium 8.5 solid ∅ 1 mm spheres to taels
- rhodium 9 solid ∅ 1 mm spheres to taels
- rhodium 9.5 solid ∅ 1 mm spheres to taels
- rhodium 10 solid ∅ 1 mm spheres to taels
- rhodium 10.5 solid ∅ 1 mm spheres to taels
- rhodium 11 solid ∅ 1 mm spheres to taels
- rhodium 11.5 solid ∅ 1 mm spheres to taels
- rhodium 12 solid ∅ 1 mm spheres to taels
- rhodium 12.5 solid ∅ 1 mm spheres to taels
- rhodium 13 solid ∅ 1 mm spheres to taels
- rhodium 13.5 solid ∅ 1 mm spheres to taels
- rhodium 14 solid ∅ 1 mm spheres to taels
- rhodium 14.5 solid ∅ 1 mm spheres to taels
- rhodium 15 solid ∅ 1 mm spheres to taels
- rhodium 15.5 solid ∅ 1 mm spheres to taels
- rhodium 16 solid ∅ 1 mm spheres to taels
- rhodium 16.5 solid ∅ 1 mm spheres to taels
- rhodium 17 solid ∅ 1 mm spheres to taels
- rhodium 17.5 solid ∅ 1 mm spheres to taels
- rhodium 18 solid ∅ 1 mm spheres to taels
- rhodium 18.5 solid ∅ 1 mm spheres to taels
- rhodium 19 solid ∅ 1 mm spheres to taels
- rhodium 19.5 solid ∅ 1 mm spheres to taels
- rhodium 20 solid ∅ 1 mm spheres to taels
- rhodium 20.5 solid ∅ 1 mm spheres to taels
- rhodium 21 solid ∅ 1 mm spheres to taels
- rhodium 21.5 solid ∅ 1 mm spheres to taels
- rhodium 22 solid ∅ 1 mm spheres to taels
- rhodium 22.5 solid ∅ 1 mm spheres to taels
- rhodium 23 solid ∅ 1 mm spheres to taels
- rhodium 23.5 solid ∅ 1 mm spheres to taels
- rhodium 24 solid ∅ 1 mm spheres to taels
- rhodium 24.5 solid ∅ 1 mm spheres to taels
- rhodium 25 solid ∅ 1 mm spheres to taels
- rhodium 25.5 solid ∅ 1 mm spheres to taels
- rhodium 26 solid ∅ 1 mm spheres to taels
- rhodium 26.5 solid ∅ 1 mm spheres to taels
- rhodium 27 solid ∅ 1 mm spheres to taels
- rhodium 27.5 solid ∅ 1 mm spheres to taels
- rhodium 28 solid ∅ 1 mm spheres to taels
- rhodium 28.5 solid ∅ 1 mm spheres to taels
- rhodium 29 solid ∅ 1 mm spheres to taels
- rhodium 29.5 solid ∅ 1 mm spheres to taels
- rhodium 30 solid ∅ 1 mm spheres to taels
- rhodium 30.5 solid ∅ 1 mm spheres to taels
- rhodium 31 solid ∅ 1 mm spheres to taels
- rhodium 31.5 solid ∅ 1 mm spheres to taels
- rhodium 32 solid ∅ 1 mm spheres to taels
- rhodium 32.5 solid ∅ 1 mm spheres to taels
- rhodium 33 solid ∅ 1 mm spheres to taels
- rhodium 33.5 solid ∅ 1 mm spheres to taels
- rhodium 34 solid ∅ 1 mm spheres to taels
- rhodium 34.5 solid ∅ 1 mm spheres to taels
- rhodium 35 solid ∅ 1 mm spheres to taels
- rhodium 35.5 solid ∅ 1 mm spheres to taels
- rhodium 36 solid ∅ 1 mm spheres to taels
- rhodium 36.5 solid ∅ 1 mm spheres to taels
- rhodium 37 solid ∅ 1 mm spheres to taels
- rhodium 37.5 solid ∅ 1 mm spheres to taels
- rhodium 38 solid ∅ 1 mm spheres to taels
- rhodium 38.5 solid ∅ 1 mm spheres to taels
- rhodium 39 solid ∅ 1 mm spheres to taels
- rhodium 39.5 solid ∅ 1 mm spheres to taels
- rhodium 40 solid ∅ 1 mm spheres to taels
- rhodium 40.5 solid ∅ 1 mm spheres to taels
- rhodium 41 solid ∅ 1 mm spheres to taels
- rhodium 41.5 solid ∅ 1 mm spheres to taels
- rhodium 42 solid ∅ 1 mm spheres to taels
- rhodium 42.5 solid ∅ 1 mm spheres to taels
- rhodium 43 solid ∅ 1 mm spheres to taels
- rhodium 43.5 solid ∅ 1 mm spheres to taels
- rhodium 44 solid ∅ 1 mm spheres to taels
- rhodium 44.5 solid ∅ 1 mm spheres to taels
- rhodium 45 solid ∅ 1 mm spheres to taels
- rhodium 45.5 solid ∅ 1 mm spheres to taels
- rhodium 46 solid ∅ 1 mm spheres to taels
- rhodium 46.5 solid ∅ 1 mm spheres to taels
- rhodium 47 solid ∅ 1 mm spheres to taels
- rhodium 47.5 solid ∅ 1 mm spheres to taels
- rhodium 48 solid ∅ 1 mm spheres to taels
- rhodium 48.5 solid ∅ 1 mm spheres to taels
- rhodium 49 solid ∅ 1 mm spheres to taels
- rhodium 49.5 solid ∅ 1 mm spheres to taels
- rhodium 50 solid ∅ 1 mm spheres to taels
Oven info & galleries
- Home Page
- Oven building CDrom details
- Pizza ovens
- New gallery
- Oven meals
- Vintage forum
- Rectangle shape vs. round igloo
- Building details
- Refractory concrete
- Heat resistant mortar
- Concrete cladding layer
- Thermal insulation
- Fire-bricks
- Fire-clay
- Saving money & time
- Good thermometer
- Oven building 1
- Building oven 2
