Category: main menu • concrete menu • Solid ∅ 1 foot spheres

concrete conversion

Amount: 1 sphere 1 foot in diameter (d, ∅ 1 ft) of volume
Equals: 0.039 short tons US (sh tn) in mass

Converting sphere 1 foot in diameter to short tons US value in the concrete units scale.

TOGGLE :   from short tons US into solid ∅ 1 foot spheres in the other way around.

concrete from sphere 1 foot in diameter to ton US (short) Conversion Results:

Enter a New sphere 1 foot in diameter Amount of concrete to Convert From * Whole numbers, decimals or fractions (ie: 6, 5.33, 17 3/8) * Precision is how many numbers after decimal point (1 - 9)

Enter Amount : Decimal Precision :

CONVERT :   between other concrete measuring units - complete list.

Conversion calculator for webmasters.

Concrete

This general purpose concrete formulation, called also concrete-aggregate (4:1 - sand/gravel aggregate : cement - mixing ratio w/ water) conversion tool is based on the concrete mass density of 2400 kg/m3 - 150 lbs/ft3 after curing (rounded). Unit mass per cubic centimeter, concrete has density 2.41g/cm3. The main concrete calculator page.

The 4:1 strength concrete mixing formula applies the measuring portions in volume sense (e.g. 4 buckets of concrete aggregate, which consists of gravel and sand, with 1 bucket of cement.) In order not to end up with a too wet concrete, add water gradually as the mixing progresses. If mixing concrete manually by hand; mix dry matter portions first and only then add water. This concrete type is commonly reinforced with metal rebars or mesh.

Convert concrete measuring units between sphere 1 foot in diameter (d, ∅ 1 ft) and short tons US (sh tn) but in the other reverse direction from short tons US into solid ∅ 1 foot spheres.

conversion result for concrete:
From	Symbol	Result	To	Symbol
1 sphere 1 foot in diameter	d, ∅ 1 ft	= 0.039	short tons US	sh tn

Converter type: concrete measurements

This online concrete from d, ∅ 1 ft into sh tn converter is a handy tool not just for certified or experienced professionals.

First unit: sphere 1 foot in diameter (d, ∅ 1 ft) is used for measuring volume.
Second: ton US (short) (sh tn) is unit of mass.

concrete per 0.039 sh tn is equivalent to 1 what?

The short tons US amount 0.039 sh tn converts into 1 d, ∅ 1 ft, one sphere 1 foot in diameter. It is the EQUAL concrete volume value of 1 sphere 1 foot in diameter but in the short tons US mass unit alternative.

How to convert 2 solid ∅ 1 foot spheres (d, ∅ 1 ft) of concrete into short tons US (sh tn)? Is there a calculation formula?

First divide the two units variables. Then multiply the result by 2 - for example:
0.039331372477357 * 2 (or divide it by / 0.5)

QUESTION:
1 d, ∅ 1 ft of concrete = ? sh tn

ANSWER:
1 d, ∅ 1 ft = 0.039 sh tn of concrete

Other applications for concrete units calculator ...

With the above mentioned two-units calculating service it provides, this concrete converter proved to be useful also as an online tool for:
1. practicing solid ∅ 1 foot spheres and short tons US of concrete ( d, ∅ 1 ft vs. sh tn ) measuring values exchange.
2. concrete amounts conversion factors - between numerous unit pairs.
3. working with - how heavy is concrete - values and properties.

International unit symbols for these two concrete measurements are:

Abbreviation or prefix ( abbr. short brevis ), unit symbol, for sphere 1 foot in diameter is:
d, ∅ 1 ft
Abbreviation or prefix ( abbr. ) brevis - short unit symbol for ton US (short) is:
sh tn

One sphere 1 foot in diameter of concrete converted to ton US (short) equals to 0.039 sh tn

How many short tons US of concrete are in 1 sphere 1 foot in diameter? The answer is: The change of 1 d, ∅ 1 ft ( sphere 1 foot in diameter ) unit of concrete measure equals = to 0.039 sh tn ( ton US (short) ) as the equivalent measure for the same concrete type.

In principle with any measuring task, switched on professional people always ensure, and their success depends on, they get the most precise conversion results everywhere and every-time. Not only whenever possible, it's always so. Often having only a good idea ( or more ideas ) might not be perfect nor good enough solution. If there is an exact known measure in d, ∅ 1 ft - solid ∅ 1 foot spheres for concrete amount, the rule is that the sphere 1 foot in diameter number gets converted into sh tn - short tons US or any other concrete unit absolutely exactly.

• 
  Jamie and Katrina's brick oven with temperature gauge, in Victoria.
• 
  Baking sourdough breads in quantity in Canada
• 
  Wood oven and meats cold smoker by Reinhard in Clearwater, Florida