Category: main menu • concrete menu • Chinese fēn
concrete conversion
Amount: 1 Chinese fēn (市分) of mass
Equals: 0.12 Japanese shō (升) in volume
Converting Chinese fēn to Japanese shō value in the concrete units scale.
TOGGLE : from Japanese shō into Chinese fēn in the other way around.
CONVERT : between other concrete measuring units - complete list.
Conversion calculator for webmasters.
Concrete
This general purpose concrete formulation, called also concrete-aggregate (4:1 - sand/gravel aggregate : cement - mixing ratio w/ water) conversion tool is based on the concrete mass density of 2400 kg/m3 - 150 lbs/ft3 after curing (rounded). Unit mass per cubic centimeter, concrete has density 2.41g/cm3. The main concrete calculator page.
The 4:1 strength concrete mixing formula applies the measuring portions in volume sense (e.g. 4 buckets of concrete aggregate, which consists of gravel and sand, with 1 bucket of cement.) In order not to end up with a too wet concrete, add water gradually as the mixing progresses. If mixing concrete manually by hand; mix dry matter portions first and only then add water. This concrete type is commonly reinforced with metal rebars or mesh.
Convert concrete measuring units between Chinese fēn (市分) and Japanese shō (升) but in the other reverse direction from Japanese shō into Chinese fēn.
conversion result for concrete: | |||||
From | Symbol | Result | To | Symbol | |
1 Chinese fēn | 市分 | = 0.12 | Japanese shō | 升 |
Converter type: concrete measurements
This online concrete from 市分 into 升 converter is a handy tool not just for certified or experienced professionals.
First unit: Chinese fēn (市分) is used for measuring mass.
Second: Japanese shō (升) is unit of volume.
concrete per 0.12 升 is equivalent to 1 what?
The Japanese shō amount 0.12 升 converts into 1 市分, one Chinese fēn. It is the EQUAL concrete mass value of 1 Chinese fēn but in the Japanese shō volume unit alternative.
How to convert 2 Chinese fēn (市分) of concrete into Japanese shō (升)? Is there a calculation formula?
First divide the two units variables. Then multiply the result by 2 - for example:
0.11517668441469 * 2 (or divide it by / 0.5)
QUESTION:
1 市分 of concrete = ? 升
ANSWER:
1 市分 = 0.12 升 of concrete
Other applications for concrete units calculator ...
With the above mentioned two-units calculating service it provides, this concrete converter proved to be useful also as an online tool for:
1. practicing Chinese fēn and Japanese shō of concrete ( 市分 vs. 升 ) measuring values exchange.
2. concrete amounts conversion factors - between numerous unit pairs.
3. working with - how heavy is concrete - values and properties.
International unit symbols for these two concrete measurements are:
Abbreviation or prefix ( abbr. short brevis ), unit symbol, for Chinese fēn is:
市分
Abbreviation or prefix ( abbr. ) brevis - short unit symbol for Japanese shō is:
升
One Chinese fēn of concrete converted to Japanese shō equals to 0.12 升
How many Japanese shō of concrete are in 1 Chinese fēn? The answer is: The change of 1 市分 ( Chinese fēn ) unit of concrete measure equals = to 0.12 升 ( Japanese shō ) as the equivalent measure for the same concrete type.
In principle with any measuring task, switched on professional people always ensure, and their success depends on, they get the most precise conversion results everywhere and every-time. Not only whenever possible, it's always so. Often having only a good idea ( or more ideas ) might not be perfect nor good enough solution. If there is an exact known measure in 市分 - Chinese fēn for concrete amount, the rule is that the Chinese fēn number gets converted into 升 - Japanese shō or any other concrete unit absolutely exactly.
Oven info & galleries
- Home Page
- Oven building CDrom details
- Pizza ovens
- New gallery
- Oven meals
- Vintage forum
- Rectangle shape vs. round igloo
- Building details
- Refractory concrete
- Heat resistant mortar
- Concrete cladding layer
- Thermal insulation
- Fire-bricks
- Fire-clay
- Saving money & time
- Good thermometer
- Oven building 1
- Building oven 2