Category: main menu • concrete menu • Chinese shēng

concrete conversion

Amount: 1 Chinese shēng (市升) of volume
Equals: 0.0010 Chinese lìfāng mǐ (m3) (立方米) in volume

Converting Chinese shēng to Chinese lìfāng mǐ (m3) value in the concrete units scale.

TOGGLE :   from Chinese lìfāng mǐ (m3) into Chinese shēng in the other way around.

concrete from Chinese shēng to Chinese lìfāng mǐ (m3) Conversion Results:

Enter a New Chinese shēng Amount of concrete to Convert From * Whole numbers, decimals or fractions (ie: 6, 5.33, 17 3/8) * Precision is how many numbers after decimal point (1 - 9)

Enter Amount : Decimal Precision :

CONVERT :   between other concrete measuring units - complete list.

Conversion calculator for webmasters.

Concrete

This general purpose concrete formulation, called also concrete-aggregate (4:1 - sand/gravel aggregate : cement - mixing ratio w/ water) conversion tool is based on the concrete mass density of 2400 kg/m3 - 150 lbs/ft3 after curing (rounded). Unit mass per cubic centimeter, concrete has density 2.41g/cm3. The main concrete calculator page.

The 4:1 strength concrete mixing formula applies the measuring portions in volume sense (e.g. 4 buckets of concrete aggregate, which consists of gravel and sand, with 1 bucket of cement.) In order not to end up with a too wet concrete, add water gradually as the mixing progresses. If mixing concrete manually by hand; mix dry matter portions first and only then add water. This concrete type is commonly reinforced with metal rebars or mesh.

Convert concrete measuring units between Chinese shēng (市升) and Chinese lìfāng mǐ (m3) (立方米) but in the other reverse direction from Chinese lìfāng mǐ (m3) into Chinese shēng.

conversion result for concrete:
From	Symbol	Result	To	Symbol
1 Chinese shēng	市升	= 0.0010	Chinese lìfāng mǐ (m3)	立方米

Converter type: concrete measurements

This online concrete from 市升 into 立方米 converter is a handy tool not just for certified or experienced professionals.

First unit: Chinese shēng (市升) is used for measuring volume.
Second: Chinese lìfāng mǐ (m3) (立方米) is unit of volume.

concrete per 0.0010 立方米 is equivalent to 1 what?

The Chinese lìfāng mǐ (m3) amount 0.0010 立方米 converts into 1 市升, one Chinese shēng. It is the EQUAL concrete volume value of 1 Chinese shēng but in the Chinese lìfāng mǐ (m3) volume unit alternative.

How to convert 2 Chinese shēng (市升) of concrete into Chinese lìfāng mǐ (m3) (立方米)? Is there a calculation formula?

First divide the two units variables. Then multiply the result by 2 - for example:
0.001 * 2 (or divide it by / 0.5)

QUESTION:
1 市升 of concrete = ? 立方米

ANSWER:
1 市升 = 0.0010 立方米 of concrete

Other applications for concrete units calculator ...

With the above mentioned two-units calculating service it provides, this concrete converter proved to be useful also as an online tool for:
1. practicing Chinese shēng and Chinese lìfāng mǐ (m3) of concrete ( 市升 vs. 立方米 ) measuring values exchange.
2. concrete amounts conversion factors - between numerous unit pairs.
3. working with - how heavy is concrete - values and properties.

International unit symbols for these two concrete measurements are:

Abbreviation or prefix ( abbr. short brevis ), unit symbol, for Chinese shēng is:
市升
Abbreviation or prefix ( abbr. ) brevis - short unit symbol for Chinese lìfāng mǐ (m3) is:
立方米

One Chinese shēng of concrete converted to Chinese lìfāng mǐ (m3) equals to 0.0010 立方米

How many Chinese lìfāng mǐ (m3) of concrete are in 1 Chinese shēng? The answer is: The change of 1 市升 ( Chinese shēng ) unit of concrete measure equals = to 0.0010 立方米 ( Chinese lìfāng mǐ (m3) ) as the equivalent measure for the same concrete type.

In principle with any measuring task, switched on professional people always ensure, and their success depends on, they get the most precise conversion results everywhere and every-time. Not only whenever possible, it's always so. Often having only a good idea ( or more ideas ) might not be perfect nor good enough solution. If there is an exact known measure in 市升 - Chinese shēng for concrete amount, the rule is that the Chinese shēng number gets converted into 立方米 - Chinese lìfāng mǐ (m3) or any other concrete unit absolutely exactly.

• 
  Jamie and Katrina's brick oven with temperature gauge, in Victoria.
• 
  Baking sourdough breads in quantity in Canada
• 
  Wood oven and meats cold smoker by Reinhard in Clearwater, Florida