Category: main menu • concrete menu • Chinese dàn
concrete conversion
Amount: 1 Chinese dàn (市石) of volume
Equals: 0.24 Metric tonnes (t) in mass
Converting Chinese dàn to Metric tonnes value in the concrete units scale.
TOGGLE : from Metric tonnes into Chinese dàn in the other way around.
CONVERT : between other concrete measuring units - complete list.
Conversion calculator for webmasters.
Concrete
This general purpose concrete formulation, called also concrete-aggregate (4:1 - sand/gravel aggregate : cement - mixing ratio w/ water) conversion tool is based on the concrete mass density of 2400 kg/m3 - 150 lbs/ft3 after curing (rounded). Unit mass per cubic centimeter, concrete has density 2.41g/cm3. The main concrete calculator page.
The 4:1 strength concrete mixing formula applies the measuring portions in volume sense (e.g. 4 buckets of concrete aggregate, which consists of gravel and sand, with 1 bucket of cement.) In order not to end up with a too wet concrete, add water gradually as the mixing progresses. If mixing concrete manually by hand; mix dry matter portions first and only then add water. This concrete type is commonly reinforced with metal rebars or mesh.
Convert concrete measuring units between Chinese dàn (市石) and Metric tonnes (t) but in the other reverse direction from Metric tonnes into Chinese dàn.
conversion result for concrete: | |||||
From | Symbol | Result | To | Symbol | |
1 Chinese dàn | 市石 | = 0.24 | Metric tonnes | t |
Converter type: concrete measurements
This online concrete from 市石 into t converter is a handy tool not just for certified or experienced professionals.
First unit: Chinese dàn (市石) is used for measuring volume.
Second: tonne (Metric) (t) is unit of mass.
concrete per 0.24 t is equivalent to 1 what?
The Metric tonnes amount 0.24 t converts into 1 市石, one Chinese dàn. It is the EQUAL concrete volume value of 1 Chinese dàn but in the Metric tonnes mass unit alternative.
How to convert 2 Chinese dàn (市石) of concrete into Metric tonnes (t)? Is there a calculation formula?
First divide the two units variables. Then multiply the result by 2 - for example:
0.24065302626279 * 2 (or divide it by / 0.5)
QUESTION:
1 市石 of concrete = ? t
ANSWER:
1 市石 = 0.24 t of concrete
Other applications for concrete units calculator ...
With the above mentioned two-units calculating service it provides, this concrete converter proved to be useful also as an online tool for:
1. practicing Chinese dàn and Metric tonnes of concrete ( 市石 vs. t ) measuring values exchange.
2. concrete amounts conversion factors - between numerous unit pairs.
3. working with - how heavy is concrete - values and properties.
International unit symbols for these two concrete measurements are:
Abbreviation or prefix ( abbr. short brevis ), unit symbol, for Chinese dàn is:
市石
Abbreviation or prefix ( abbr. ) brevis - short unit symbol for tonne (Metric) is:
t
One Chinese dàn of concrete converted to tonne (Metric) equals to 0.24 t
How many Metric tonnes of concrete are in 1 Chinese dàn? The answer is: The change of 1 市石 ( Chinese dàn ) unit of concrete measure equals = to 0.24 t ( tonne (Metric) ) as the equivalent measure for the same concrete type.
In principle with any measuring task, switched on professional people always ensure, and their success depends on, they get the most precise conversion results everywhere and every-time. Not only whenever possible, it's always so. Often having only a good idea ( or more ideas ) might not be perfect nor good enough solution. If there is an exact known measure in 市石 - Chinese dàn for concrete amount, the rule is that the Chinese dàn number gets converted into t - Metric tonnes or any other concrete unit absolutely exactly.
Oven info & galleries
- Home Page
- Oven building CDrom details
- Pizza ovens
- New gallery
- Oven meals
- Vintage forum
- Rectangle shape vs. round igloo
- Building details
- Refractory concrete
- Heat resistant mortar
- Concrete cladding layer
- Thermal insulation
- Fire-bricks
- Fire-clay
- Saving money & time
- Good thermometer
- Oven building 1
- Building oven 2