Category: main menu • concrete menu • One-meter diameter spheres
concrete conversion
Amount: 1 one-meter diameter sphere (∅ 1 m) of volume
Equals: 61,023,744.09 solid ∅ 1 inch spheres (d, ∅ 1 in) in volume
Converting one-meter diameter sphere to solid ∅ 1 inch spheres value in the concrete units scale.
TOGGLE : from solid ∅ 1 inch spheres into one-meter diameter spheres in the other way around.
CONVERT : between other concrete measuring units - complete list.
Conversion calculator for webmasters.
Concrete
This general purpose concrete formulation, called also concrete-aggregate (4:1 - sand/gravel aggregate : cement - mixing ratio w/ water) conversion tool is based on the concrete mass density of 2400 kg/m3 - 150 lbs/ft3 after curing (rounded). Unit mass per cubic centimeter, concrete has density 2.41g/cm3. The main concrete calculator page.
The 4:1 strength concrete mixing formula applies the measuring portions in volume sense (e.g. 4 buckets of concrete aggregate, which consists of gravel and sand, with 1 bucket of cement.) In order not to end up with a too wet concrete, add water gradually as the mixing progresses. If mixing concrete manually by hand; mix dry matter portions first and only then add water. This concrete type is commonly reinforced with metal rebars or mesh.
Convert concrete measuring units between one-meter diameter sphere (∅ 1 m) and solid ∅ 1 inch spheres (d, ∅ 1 in) but in the other reverse direction from solid ∅ 1 inch spheres into one-meter diameter spheres.
conversion result for concrete: | |||||
From | Symbol | Result | To | Symbol | |
1 one-meter diameter sphere | ∅ 1 m | = 61,023,744.09 | solid ∅ 1 inch spheres | d, ∅ 1 in |
Converter type: concrete measurements
This online concrete from ∅ 1 m into d, ∅ 1 in converter is a handy tool not just for certified or experienced professionals.
First unit: one-meter diameter sphere (∅ 1 m) is used for measuring volume.
Second: sphere 1 inch in diameter (d, ∅ 1 in) is unit of volume.
concrete per 61,023,744.09 d, ∅ 1 in is equivalent to 1 what?
The solid ∅ 1 inch spheres amount 61,023,744.09 d, ∅ 1 in converts into 1 ∅ 1 m, one one-meter diameter sphere. It is the EQUAL concrete volume value of 1 one-meter diameter sphere but in the solid ∅ 1 inch spheres volume unit alternative.
How to convert 2 one-meter diameter spheres (∅ 1 m) of concrete into solid ∅ 1 inch spheres (d, ∅ 1 in)? Is there a calculation formula?
First divide the two units variables. Then multiply the result by 2 - for example:
61023744.094732 * 2 (or divide it by / 0.5)
QUESTION:
1 ∅ 1 m of concrete = ? d, ∅ 1 in
ANSWER:
1 ∅ 1 m = 61,023,744.09 d, ∅ 1 in of concrete
Other applications for concrete units calculator ...
With the above mentioned two-units calculating service it provides, this concrete converter proved to be useful also as an online tool for:
1. practicing one-meter diameter spheres and solid ∅ 1 inch spheres of concrete ( ∅ 1 m vs. d, ∅ 1 in ) measuring values exchange.
2. concrete amounts conversion factors - between numerous unit pairs.
3. working with - how heavy is concrete - values and properties.
International unit symbols for these two concrete measurements are:
Abbreviation or prefix ( abbr. short brevis ), unit symbol, for one-meter diameter sphere is:
∅ 1 m
Abbreviation or prefix ( abbr. ) brevis - short unit symbol for sphere 1 inch in diameter is:
d, ∅ 1 in
One one-meter diameter sphere of concrete converted to sphere 1 inch in diameter equals to 61,023,744.09 d, ∅ 1 in
How many solid ∅ 1 inch spheres of concrete are in 1 one-meter diameter sphere? The answer is: The change of 1 ∅ 1 m ( one-meter diameter sphere ) unit of concrete measure equals = to 61,023,744.09 d, ∅ 1 in ( sphere 1 inch in diameter ) as the equivalent measure for the same concrete type.
In principle with any measuring task, switched on professional people always ensure, and their success depends on, they get the most precise conversion results everywhere and every-time. Not only whenever possible, it's always so. Often having only a good idea ( or more ideas ) might not be perfect nor good enough solution. If there is an exact known measure in ∅ 1 m - one-meter diameter spheres for concrete amount, the rule is that the one-meter diameter sphere number gets converted into d, ∅ 1 in - solid ∅ 1 inch spheres or any other concrete unit absolutely exactly.
Oven info & galleries
- Home Page
- Oven building CDrom details
- Pizza ovens
- New gallery
- Oven meals
- Vintage forum
- Rectangle shape vs. round igloo
- Building details
- Refractory concrete
- Heat resistant mortar
- Concrete cladding layer
- Thermal insulation
- Fire-bricks
- Fire-clay
- Saving money & time
- Good thermometer
- Oven building 1
- Building oven 2