Category: main menu • concrete menu • Cubic decimeters

concrete conversion

Amount: 1 cubic decimeter (dm3) of volume
Equals: 0.035 cubic feet (cu ft - ft3) in volume

Converting cubic decimeter to cubic feet value in the concrete units scale.

TOGGLE :   from cubic feet into cubic decimeters in the other way around.

concrete from cubic decimeter to cubic foot Conversion Results:

Enter a New cubic decimeter Amount of concrete to Convert From * Whole numbers, decimals or fractions (ie: 6, 5.33, 17 3/8) * Precision is how many numbers after decimal point (1 - 9)

Enter Amount : Decimal Precision :

CONVERT :   between other concrete measuring units - complete list.

Conversion calculator for webmasters.

Concrete

This general purpose concrete formulation, called also concrete-aggregate (4:1 - sand/gravel aggregate : cement - mixing ratio w/ water) conversion tool is based on the concrete mass density of 2400 kg/m3 - 150 lbs/ft3 after curing (rounded). Unit mass per cubic centimeter, concrete has density 2.41g/cm3. The main concrete calculator page.

The 4:1 strength concrete mixing formula applies the measuring portions in volume sense (e.g. 4 buckets of concrete aggregate, which consists of gravel and sand, with 1 bucket of cement.) In order not to end up with a too wet concrete, add water gradually as the mixing progresses. If mixing concrete manually by hand; mix dry matter portions first and only then add water. This concrete type is commonly reinforced with metal rebars or mesh.

Convert concrete measuring units between cubic decimeter (dm3) and cubic feet (cu ft - ft3) but in the other reverse direction from cubic feet into cubic decimeters.

conversion result for concrete:
From	Symbol	Result	To	Symbol
1 cubic decimeter	dm3	= 0.035	cubic feet	cu ft - ft3

Converter type: concrete measurements

This online concrete from dm3 into cu ft - ft3 converter is a handy tool not just for certified or experienced professionals.

First unit: cubic decimeter (dm3) is used for measuring volume.
Second: cubic foot (cu ft - ft3) is unit of volume.

concrete per 0.035 cu ft - ft3 is equivalent to 1 what?

The cubic feet amount 0.035 cu ft - ft3 converts into 1 dm3, one cubic decimeter. It is the EQUAL concrete volume value of 1 cubic decimeter but in the cubic feet volume unit alternative.

How to convert 2 cubic decimeters (dm3) of concrete into cubic feet (cu ft - ft3)? Is there a calculation formula?

First divide the two units variables. Then multiply the result by 2 - for example:
0.035314666721489 * 2 (or divide it by / 0.5)

QUESTION:
1 dm3 of concrete = ? cu ft - ft3

ANSWER:
1 dm3 = 0.035 cu ft - ft3 of concrete

Other applications for concrete units calculator ...

With the above mentioned two-units calculating service it provides, this concrete converter proved to be useful also as an online tool for:
1. practicing cubic decimeters and cubic feet of concrete ( dm3 vs. cu ft - ft3 ) measuring values exchange.
2. concrete amounts conversion factors - between numerous unit pairs.
3. working with - how heavy is concrete - values and properties.

International unit symbols for these two concrete measurements are:

Abbreviation or prefix ( abbr. short brevis ), unit symbol, for cubic decimeter is:
dm3
Abbreviation or prefix ( abbr. ) brevis - short unit symbol for cubic foot is:
cu ft - ft3

One cubic decimeter of concrete converted to cubic foot equals to 0.035 cu ft - ft3

How many cubic feet of concrete are in 1 cubic decimeter? The answer is: The change of 1 dm3 ( cubic decimeter ) unit of concrete measure equals = to 0.035 cu ft - ft3 ( cubic foot ) as the equivalent measure for the same concrete type.

In principle with any measuring task, switched on professional people always ensure, and their success depends on, they get the most precise conversion results everywhere and every-time. Not only whenever possible, it's always so. Often having only a good idea ( or more ideas ) might not be perfect nor good enough solution. If there is an exact known measure in dm3 - cubic decimeters for concrete amount, the rule is that the cubic decimeter number gets converted into cu ft - ft3 - cubic feet or any other concrete unit absolutely exactly.

• 
  Jamie and Katrina's brick oven with temperature gauge, in Victoria.
• 
  Baking sourdough breads in quantity in Canada
• 
  Wood oven and meats cold smoker by Reinhard in Clearwater, Florida