Category: main menu • concrete menu • Cubic decimeters
concrete conversion
Amount: 1 cubic decimeter (dm3) of volume
Equals: 1,358.21 drams (dr) in mass
Converting cubic decimeter to drams value in the concrete units scale.
TOGGLE : from drams into cubic decimeters in the other way around.
CONVERT : between other concrete measuring units - complete list.
Conversion calculator for webmasters.
Concrete
This general purpose concrete formulation, called also concrete-aggregate (4:1 - sand/gravel aggregate : cement - mixing ratio w/ water) conversion tool is based on the concrete mass density of 2400 kg/m3 - 150 lbs/ft3 after curing (rounded). Unit mass per cubic centimeter, concrete has density 2.41g/cm3. The main concrete calculator page.
The 4:1 strength concrete mixing formula applies the measuring portions in volume sense (e.g. 4 buckets of concrete aggregate, which consists of gravel and sand, with 1 bucket of cement.) In order not to end up with a too wet concrete, add water gradually as the mixing progresses. If mixing concrete manually by hand; mix dry matter portions first and only then add water. This concrete type is commonly reinforced with metal rebars or mesh.
Convert concrete measuring units between cubic decimeter (dm3) and drams (dr) but in the other reverse direction from drams into cubic decimeters.
conversion result for concrete: | |||||
From | Symbol | Result | To | Symbol | |
1 cubic decimeter | dm3 | = 1,358.21 | drams | dr |
Converter type: concrete measurements
This online concrete from dm3 into dr converter is a handy tool not just for certified or experienced professionals.
First unit: cubic decimeter (dm3) is used for measuring volume.
Second: dram (dr) is unit of mass.
concrete per 1,358.21 dr is equivalent to 1 what?
The drams amount 1,358.21 dr converts into 1 dm3, one cubic decimeter. It is the EQUAL concrete volume value of 1 cubic decimeter but in the drams mass unit alternative.
How to convert 2 cubic decimeters (dm3) of concrete into drams (dr)? Is there a calculation formula?
First divide the two units variables. Then multiply the result by 2 - for example:
1358.2057106312 * 2 (or divide it by / 0.5)
QUESTION:
1 dm3 of concrete = ? dr
ANSWER:
1 dm3 = 1,358.21 dr of concrete
Other applications for concrete units calculator ...
With the above mentioned two-units calculating service it provides, this concrete converter proved to be useful also as an online tool for:
1. practicing cubic decimeters and drams of concrete ( dm3 vs. dr ) measuring values exchange.
2. concrete amounts conversion factors - between numerous unit pairs.
3. working with - how heavy is concrete - values and properties.
International unit symbols for these two concrete measurements are:
Abbreviation or prefix ( abbr. short brevis ), unit symbol, for cubic decimeter is:
dm3
Abbreviation or prefix ( abbr. ) brevis - short unit symbol for dram is:
dr
One cubic decimeter of concrete converted to dram equals to 1,358.21 dr
How many drams of concrete are in 1 cubic decimeter? The answer is: The change of 1 dm3 ( cubic decimeter ) unit of concrete measure equals = to 1,358.21 dr ( dram ) as the equivalent measure for the same concrete type.
In principle with any measuring task, switched on professional people always ensure, and their success depends on, they get the most precise conversion results everywhere and every-time. Not only whenever possible, it's always so. Often having only a good idea ( or more ideas ) might not be perfect nor good enough solution. If there is an exact known measure in dm3 - cubic decimeters for concrete amount, the rule is that the cubic decimeter number gets converted into dr - drams or any other concrete unit absolutely exactly.
Oven info & galleries
- Home Page
- Oven building CDrom details
- Pizza ovens
- New gallery
- Oven meals
- Vintage forum
- Rectangle shape vs. round igloo
- Building details
- Refractory concrete
- Heat resistant mortar
- Concrete cladding layer
- Thermal insulation
- Fire-bricks
- Fire-clay
- Saving money & time
- Good thermometer
- Oven building 1
- Building oven 2