Category: main menu • concrete menu • Cups Metric

concrete conversion

Amount: 1 cup Metric (cup mtr. si) of volume
Equals: 0.017 solid ∅ 1 foot spheres (d, ∅ 1 ft) in volume

Converting cup Metric to solid ∅ 1 foot spheres value in the concrete units scale.

TOGGLE :   from solid ∅ 1 foot spheres into cups Metric in the other way around.

concrete from cup Metric to sphere 1 foot in diameter Conversion Results:

Enter a New cup Metric Amount of concrete to Convert From * Whole numbers, decimals or fractions (ie: 6, 5.33, 17 3/8) * Precision is how many numbers after decimal point (1 - 9)

Enter Amount : Decimal Precision :

CONVERT :   between other concrete measuring units - complete list.

Conversion calculator for webmasters.

Concrete

This general purpose concrete formulation, called also concrete-aggregate (4:1 - sand/gravel aggregate : cement - mixing ratio w/ water) conversion tool is based on the concrete mass density of 2400 kg/m3 - 150 lbs/ft3 after curing (rounded). Unit mass per cubic centimeter, concrete has density 2.41g/cm3. The main concrete calculator page.

The 4:1 strength concrete mixing formula applies the measuring portions in volume sense (e.g. 4 buckets of concrete aggregate, which consists of gravel and sand, with 1 bucket of cement.) In order not to end up with a too wet concrete, add water gradually as the mixing progresses. If mixing concrete manually by hand; mix dry matter portions first and only then add water. This concrete type is commonly reinforced with metal rebars or mesh.

Convert concrete measuring units between cup Metric (cup mtr. si) and solid ∅ 1 foot spheres (d, ∅ 1 ft) but in the other reverse direction from solid ∅ 1 foot spheres into cups Metric.

conversion result for concrete:
From	Symbol	Result	To	Symbol
1 cup Metric	cup mtr. si	= 0.017	solid ∅ 1 foot spheres	d, ∅ 1 ft

Converter type: concrete measurements

This online concrete from cup mtr. si into d, ∅ 1 ft converter is a handy tool not just for certified or experienced professionals.

First unit: cup Metric (cup mtr. si) is used for measuring volume.
Second: sphere 1 foot in diameter (d, ∅ 1 ft) is unit of volume.

concrete per 0.017 d, ∅ 1 ft is equivalent to 1 what?

The solid ∅ 1 foot spheres amount 0.017 d, ∅ 1 ft converts into 1 cup mtr. si, one cup Metric. It is the EQUAL concrete volume value of 1 cup Metric but in the solid ∅ 1 foot spheres volume unit alternative.

How to convert 2 cups Metric (cup mtr. si) of concrete into solid ∅ 1 foot spheres (d, ∅ 1 ft)? Is there a calculation formula?

First divide the two units variables. Then multiply the result by 2 - for example:
0.016861511317103 * 2 (or divide it by / 0.5)

QUESTION:
1 cup mtr. si of concrete = ? d, ∅ 1 ft

ANSWER:
1 cup mtr. si = 0.017 d, ∅ 1 ft of concrete

Other applications for concrete units calculator ...

With the above mentioned two-units calculating service it provides, this concrete converter proved to be useful also as an online tool for:
1. practicing cups Metric and solid ∅ 1 foot spheres of concrete ( cup mtr. si vs. d, ∅ 1 ft ) measuring values exchange.
2. concrete amounts conversion factors - between numerous unit pairs.
3. working with - how heavy is concrete - values and properties.

International unit symbols for these two concrete measurements are:

Abbreviation or prefix ( abbr. short brevis ), unit symbol, for cup Metric is:
cup mtr. si
Abbreviation or prefix ( abbr. ) brevis - short unit symbol for sphere 1 foot in diameter is:
d, ∅ 1 ft

One cup Metric of concrete converted to sphere 1 foot in diameter equals to 0.017 d, ∅ 1 ft

How many solid ∅ 1 foot spheres of concrete are in 1 cup Metric? The answer is: The change of 1 cup mtr. si ( cup Metric ) unit of concrete measure equals = to 0.017 d, ∅ 1 ft ( sphere 1 foot in diameter ) as the equivalent measure for the same concrete type.

In principle with any measuring task, switched on professional people always ensure, and their success depends on, they get the most precise conversion results everywhere and every-time. Not only whenever possible, it's always so. Often having only a good idea ( or more ideas ) might not be perfect nor good enough solution. If there is an exact known measure in cup mtr. si - cups Metric for concrete amount, the rule is that the cup Metric number gets converted into d, ∅ 1 ft - solid ∅ 1 foot spheres or any other concrete unit absolutely exactly.

• 
  Jamie and Katrina's brick oven with temperature gauge, in Victoria.
• 
  Baking sourdough breads in quantity in Canada
• 
  Wood oven and meats cold smoker by Reinhard in Clearwater, Florida