Category: main menu • concrete menu • Cups Metric
concrete conversion
Amount: 1 cup Metric (cup mtr. si) of volume
Equals: 339.55 drams (dr) in mass
Converting cup Metric to drams value in the concrete units scale.
TOGGLE : from drams into cups Metric in the other way around.
CONVERT : between other concrete measuring units - complete list.
Conversion calculator for webmasters.
Concrete
This general purpose concrete formulation, called also concrete-aggregate (4:1 - sand/gravel aggregate : cement - mixing ratio w/ water) conversion tool is based on the concrete mass density of 2400 kg/m3 - 150 lbs/ft3 after curing (rounded). Unit mass per cubic centimeter, concrete has density 2.41g/cm3. The main concrete calculator page.
The 4:1 strength concrete mixing formula applies the measuring portions in volume sense (e.g. 4 buckets of concrete aggregate, which consists of gravel and sand, with 1 bucket of cement.) In order not to end up with a too wet concrete, add water gradually as the mixing progresses. If mixing concrete manually by hand; mix dry matter portions first and only then add water. This concrete type is commonly reinforced with metal rebars or mesh.
Convert concrete measuring units between cup Metric (cup mtr. si) and drams (dr) but in the other reverse direction from drams into cups Metric.
conversion result for concrete: | |||||
From | Symbol | Result | To | Symbol | |
1 cup Metric | cup mtr. si | = 339.55 | drams | dr |
Converter type: concrete measurements
This online concrete from cup mtr. si into dr converter is a handy tool not just for certified or experienced professionals.
First unit: cup Metric (cup mtr. si) is used for measuring volume.
Second: dram (dr) is unit of mass.
concrete per 339.55 dr is equivalent to 1 what?
The drams amount 339.55 dr converts into 1 cup mtr. si, one cup Metric. It is the EQUAL concrete volume value of 1 cup Metric but in the drams mass unit alternative.
How to convert 2 cups Metric (cup mtr. si) of concrete into drams (dr)? Is there a calculation formula?
First divide the two units variables. Then multiply the result by 2 - for example:
339.5514276578 * 2 (or divide it by / 0.5)
QUESTION:
1 cup mtr. si of concrete = ? dr
ANSWER:
1 cup mtr. si = 339.55 dr of concrete
Other applications for concrete units calculator ...
With the above mentioned two-units calculating service it provides, this concrete converter proved to be useful also as an online tool for:
1. practicing cups Metric and drams of concrete ( cup mtr. si vs. dr ) measuring values exchange.
2. concrete amounts conversion factors - between numerous unit pairs.
3. working with - how heavy is concrete - values and properties.
International unit symbols for these two concrete measurements are:
Abbreviation or prefix ( abbr. short brevis ), unit symbol, for cup Metric is:
cup mtr. si
Abbreviation or prefix ( abbr. ) brevis - short unit symbol for dram is:
dr
One cup Metric of concrete converted to dram equals to 339.55 dr
How many drams of concrete are in 1 cup Metric? The answer is: The change of 1 cup mtr. si ( cup Metric ) unit of concrete measure equals = to 339.55 dr ( dram ) as the equivalent measure for the same concrete type.
In principle with any measuring task, switched on professional people always ensure, and their success depends on, they get the most precise conversion results everywhere and every-time. Not only whenever possible, it's always so. Often having only a good idea ( or more ideas ) might not be perfect nor good enough solution. If there is an exact known measure in cup mtr. si - cups Metric for concrete amount, the rule is that the cup Metric number gets converted into dr - drams or any other concrete unit absolutely exactly.
Oven info & galleries
- Home Page
- Oven building CDrom details
- Pizza ovens
- New gallery
- Oven meals
- Vintage forum
- Rectangle shape vs. round igloo
- Building details
- Refractory concrete
- Heat resistant mortar
- Concrete cladding layer
- Thermal insulation
- Fire-bricks
- Fire-clay
- Saving money & time
- Good thermometer
- Oven building 1
- Building oven 2