Category: main menu • concrete menu • Drams

concrete conversion

Amount: 1 dram (dr) of mass
Equals: 0.00019 gallons (gal) in volume

Converting dram to gallons value in the concrete units scale.

TOGGLE :   from gallons into drams in the other way around.

concrete from dram to gallon Conversion Results:

Enter a New dram Amount of concrete to Convert From * Whole numbers, decimals or fractions (ie: 6, 5.33, 17 3/8) * Precision is how many numbers after decimal point (1 - 9)

Enter Amount : Decimal Precision :

CONVERT :   between other concrete measuring units - complete list.

Conversion calculator for webmasters.

Concrete

This general purpose concrete formulation, called also concrete-aggregate (4:1 - sand/gravel aggregate : cement - mixing ratio w/ water) conversion tool is based on the concrete mass density of 2400 kg/m3 - 150 lbs/ft3 after curing (rounded). Unit mass per cubic centimeter, concrete has density 2.41g/cm3. The main concrete calculator page.

The 4:1 strength concrete mixing formula applies the measuring portions in volume sense (e.g. 4 buckets of concrete aggregate, which consists of gravel and sand, with 1 bucket of cement.) In order not to end up with a too wet concrete, add water gradually as the mixing progresses. If mixing concrete manually by hand; mix dry matter portions first and only then add water. This concrete type is commonly reinforced with metal rebars or mesh.

Convert concrete measuring units between dram (dr) and gallons (gal) but in the other reverse direction from gallons into drams.

conversion result for concrete:
From	Symbol	Result	To	Symbol
1 dram	dr	= 0.00019	gallons	gal

Converter type: concrete measurements

This online concrete from dr into gal converter is a handy tool not just for certified or experienced professionals.

First unit: dram (dr) is used for measuring mass.
Second: gallon (gal) is unit of volume.

concrete per 0.00019 gal is equivalent to 1 what?

The gallons amount 0.00019 gal converts into 1 dr, one dram. It is the EQUAL concrete mass value of 1 dram but in the gallons volume unit alternative.

How to convert 2 drams (dr) of concrete into gallons (gal)? Is there a calculation formula?

First divide the two units variables. Then multiply the result by 2 - for example:
0.00019450076692387 * 2 (or divide it by / 0.5)

QUESTION:
1 dr of concrete = ? gal

ANSWER:
1 dr = 0.00019 gal of concrete

Other applications for concrete units calculator ...

With the above mentioned two-units calculating service it provides, this concrete converter proved to be useful also as an online tool for:
1. practicing drams and gallons of concrete ( dr vs. gal ) measuring values exchange.
2. concrete amounts conversion factors - between numerous unit pairs.
3. working with - how heavy is concrete - values and properties.

International unit symbols for these two concrete measurements are:

Abbreviation or prefix ( abbr. short brevis ), unit symbol, for dram is:
dr
Abbreviation or prefix ( abbr. ) brevis - short unit symbol for gallon is:
gal

One dram of concrete converted to gallon equals to 0.00019 gal

How many gallons of concrete are in 1 dram? The answer is: The change of 1 dr ( dram ) unit of concrete measure equals = to 0.00019 gal ( gallon ) as the equivalent measure for the same concrete type.

In principle with any measuring task, switched on professional people always ensure, and their success depends on, they get the most precise conversion results everywhere and every-time. Not only whenever possible, it's always so. Often having only a good idea ( or more ideas ) might not be perfect nor good enough solution. If there is an exact known measure in dr - drams for concrete amount, the rule is that the dram number gets converted into gal - gallons or any other concrete unit absolutely exactly.

• 
  Jamie and Katrina's brick oven with temperature gauge, in Victoria.
• 
  Baking sourdough breads in quantity in Canada
• 
  Wood oven and meats cold smoker by Reinhard in Clearwater, Florida