Category: main menu • concrete menu • Fluid drams
concrete conversion
Amount: 1 fluid dram (fl dr) of volume
Equals: 0.037 Chinese gě (合) in volume
Converting fluid dram to Chinese gě value in the concrete units scale.
TOGGLE : from Chinese gě into fluid drams in the other way around.
CONVERT : between other concrete measuring units - complete list.
Conversion calculator for webmasters.
Concrete
This general purpose concrete formulation, called also concrete-aggregate (4:1 - sand/gravel aggregate : cement - mixing ratio w/ water) conversion tool is based on the concrete mass density of 2400 kg/m3 - 150 lbs/ft3 after curing (rounded). Unit mass per cubic centimeter, concrete has density 2.41g/cm3. The main concrete calculator page.
The 4:1 strength concrete mixing formula applies the measuring portions in volume sense (e.g. 4 buckets of concrete aggregate, which consists of gravel and sand, with 1 bucket of cement.) In order not to end up with a too wet concrete, add water gradually as the mixing progresses. If mixing concrete manually by hand; mix dry matter portions first and only then add water. This concrete type is commonly reinforced with metal rebars or mesh.
Convert concrete measuring units between fluid dram (fl dr) and Chinese gě (合) but in the other reverse direction from Chinese gě into fluid drams.
conversion result for concrete: | |||||
From | Symbol | Result | To | Symbol | |
1 fluid dram | fl dr | = 0.037 | Chinese gě | 合 |
Converter type: concrete measurements
This online concrete from fl dr into 合 converter is a handy tool not just for certified or experienced professionals.
First unit: fluid dram (fl dr) is used for measuring volume.
Second: Chinese gě (合) is unit of volume.
concrete per 0.037 合 is equivalent to 1 what?
The Chinese gě amount 0.037 合 converts into 1 fl dr, one fluid dram. It is the EQUAL concrete volume value of 1 fluid dram but in the Chinese gě volume unit alternative.
How to convert 2 fluid drams (fl dr) of concrete into Chinese gě (合)? Is there a calculation formula?
First divide the two units variables. Then multiply the result by 2 - for example:
0.036966911953125 * 2 (or divide it by / 0.5)
QUESTION:
1 fl dr of concrete = ? 合
ANSWER:
1 fl dr = 0.037 合 of concrete
Other applications for concrete units calculator ...
With the above mentioned two-units calculating service it provides, this concrete converter proved to be useful also as an online tool for:
1. practicing fluid drams and Chinese gě of concrete ( fl dr vs. 合 ) measuring values exchange.
2. concrete amounts conversion factors - between numerous unit pairs.
3. working with - how heavy is concrete - values and properties.
International unit symbols for these two concrete measurements are:
Abbreviation or prefix ( abbr. short brevis ), unit symbol, for fluid dram is:
fl dr
Abbreviation or prefix ( abbr. ) brevis - short unit symbol for Chinese gě is:
合
One fluid dram of concrete converted to Chinese gě equals to 0.037 合
How many Chinese gě of concrete are in 1 fluid dram? The answer is: The change of 1 fl dr ( fluid dram ) unit of concrete measure equals = to 0.037 合 ( Chinese gě ) as the equivalent measure for the same concrete type.
In principle with any measuring task, switched on professional people always ensure, and their success depends on, they get the most precise conversion results everywhere and every-time. Not only whenever possible, it's always so. Often having only a good idea ( or more ideas ) might not be perfect nor good enough solution. If there is an exact known measure in fl dr - fluid drams for concrete amount, the rule is that the fluid dram number gets converted into 合 - Chinese gě or any other concrete unit absolutely exactly.
Oven info & galleries
- Home Page
- Oven building CDrom details
- Pizza ovens
- New gallery
- Oven meals
- Vintage forum
- Rectangle shape vs. round igloo
- Building details
- Refractory concrete
- Heat resistant mortar
- Concrete cladding layer
- Thermal insulation
- Fire-bricks
- Fire-clay
- Saving money & time
- Good thermometer
- Oven building 1
- Building oven 2