Category: main menu • concrete menu • Gallons
concrete conversion
Amount: 1 gallon (gal) of volume
Equals: 0.010 short tons US (sh tn) in mass
Converting gallon to short tons US value in the concrete units scale.
TOGGLE : from short tons US into gallons in the other way around.
CONVERT : between other concrete measuring units - complete list.
Conversion calculator for webmasters.
Concrete
This general purpose concrete formulation, called also concrete-aggregate (4:1 - sand/gravel aggregate : cement - mixing ratio w/ water) conversion tool is based on the concrete mass density of 2400 kg/m3 - 150 lbs/ft3 after curing (rounded). Unit mass per cubic centimeter, concrete has density 2.41g/cm3. The main concrete calculator page.
The 4:1 strength concrete mixing formula applies the measuring portions in volume sense (e.g. 4 buckets of concrete aggregate, which consists of gravel and sand, with 1 bucket of cement.) In order not to end up with a too wet concrete, add water gradually as the mixing progresses. If mixing concrete manually by hand; mix dry matter portions first and only then add water. This concrete type is commonly reinforced with metal rebars or mesh.
Convert concrete measuring units between gallon (gal) and short tons US (sh tn) but in the other reverse direction from short tons US into gallons.
conversion result for concrete: | |||||
From | Symbol | Result | To | Symbol | |
1 gallon | gal | = 0.010 | short tons US | sh tn |
Converter type: concrete measurements
This online concrete from gal into sh tn converter is a handy tool not just for certified or experienced professionals.
First unit: gallon (gal) is used for measuring volume.
Second: ton US (short) (sh tn) is unit of mass.
concrete per 0.010 sh tn is equivalent to 1 what?
The short tons US amount 0.010 sh tn converts into 1 gal, one gallon. It is the EQUAL concrete volume value of 1 gallon but in the short tons US mass unit alternative.
How to convert 2 gallons (gal) of concrete into short tons US (sh tn)? Is there a calculation formula?
First divide the two units variables. Then multiply the result by 2 - for example:
0.010041734183827 * 2 (or divide it by / 0.5)
QUESTION:
1 gal of concrete = ? sh tn
ANSWER:
1 gal = 0.010 sh tn of concrete
Other applications for concrete units calculator ...
With the above mentioned two-units calculating service it provides, this concrete converter proved to be useful also as an online tool for:
1. practicing gallons and short tons US of concrete ( gal vs. sh tn ) measuring values exchange.
2. concrete amounts conversion factors - between numerous unit pairs.
3. working with - how heavy is concrete - values and properties.
International unit symbols for these two concrete measurements are:
Abbreviation or prefix ( abbr. short brevis ), unit symbol, for gallon is:
gal
Abbreviation or prefix ( abbr. ) brevis - short unit symbol for ton US (short) is:
sh tn
One gallon of concrete converted to ton US (short) equals to 0.010 sh tn
How many short tons US of concrete are in 1 gallon? The answer is: The change of 1 gal ( gallon ) unit of concrete measure equals = to 0.010 sh tn ( ton US (short) ) as the equivalent measure for the same concrete type.
In principle with any measuring task, switched on professional people always ensure, and their success depends on, they get the most precise conversion results everywhere and every-time. Not only whenever possible, it's always so. Often having only a good idea ( or more ideas ) might not be perfect nor good enough solution. If there is an exact known measure in gal - gallons for concrete amount, the rule is that the gallon number gets converted into sh tn - short tons US or any other concrete unit absolutely exactly.
Oven info & galleries
- Home Page
- Oven building CDrom details
- Pizza ovens
- New gallery
- Oven meals
- Vintage forum
- Rectangle shape vs. round igloo
- Building details
- Refractory concrete
- Heat resistant mortar
- Concrete cladding layer
- Thermal insulation
- Fire-bricks
- Fire-clay
- Saving money & time
- Good thermometer
- Oven building 1
- Building oven 2