Category: main menu • concrete menu • Japanese gō
concrete conversion
Amount: 1 Japanese gō (合) of volume
Equals: 0.0087 Chinese jīn (市斤) in mass
Converting Japanese gō to Chinese jīn value in the concrete units scale.
TOGGLE : from Chinese jīn into Japanese gō in the other way around.
CONVERT : between other concrete measuring units - complete list.
Conversion calculator for webmasters.
Concrete
This general purpose concrete formulation, called also concrete-aggregate (4:1 - sand/gravel aggregate : cement - mixing ratio w/ water) conversion tool is based on the concrete mass density of 2400 kg/m3 - 150 lbs/ft3 after curing (rounded). Unit mass per cubic centimeter, concrete has density 2.41g/cm3. The main concrete calculator page.
The 4:1 strength concrete mixing formula applies the measuring portions in volume sense (e.g. 4 buckets of concrete aggregate, which consists of gravel and sand, with 1 bucket of cement.) In order not to end up with a too wet concrete, add water gradually as the mixing progresses. If mixing concrete manually by hand; mix dry matter portions first and only then add water. This concrete type is commonly reinforced with metal rebars or mesh.
Convert concrete measuring units between Japanese gō (合) and Chinese jīn (市斤) but in the other reverse direction from Chinese jīn into Japanese gō.
conversion result for concrete: | |||||
From | Symbol | Result | To | Symbol | |
1 Japanese gō | 合 | = 0.0087 | Chinese jīn | 市斤 |
Converter type: concrete measurements
This online concrete from 合 into 市斤 converter is a handy tool not just for certified or experienced professionals.
First unit: Japanese gō (合) is used for measuring volume.
Second: Chinese jīn (市斤) is unit of mass.
concrete per 0.0087 市斤 is equivalent to 1 what?
The Chinese jīn amount 0.0087 市斤 converts into 1 合, one Japanese gō. It is the EQUAL concrete volume value of 1 Japanese gō but in the Chinese jīn mass unit alternative.
How to convert 2 Japanese gō (合) of concrete into Chinese jīn (市斤)? Is there a calculation formula?
First divide the two units variables. Then multiply the result by 2 - for example:
0.0086823127882338 * 2 (or divide it by / 0.5)
QUESTION:
1 合 of concrete = ? 市斤
ANSWER:
1 合 = 0.0087 市斤 of concrete
Other applications for concrete units calculator ...
With the above mentioned two-units calculating service it provides, this concrete converter proved to be useful also as an online tool for:
1. practicing Japanese gō and Chinese jīn of concrete ( 合 vs. 市斤 ) measuring values exchange.
2. concrete amounts conversion factors - between numerous unit pairs.
3. working with - how heavy is concrete - values and properties.
International unit symbols for these two concrete measurements are:
Abbreviation or prefix ( abbr. short brevis ), unit symbol, for Japanese gō is:
合
Abbreviation or prefix ( abbr. ) brevis - short unit symbol for Chinese jīn is:
市斤
One Japanese gō of concrete converted to Chinese jīn equals to 0.0087 市斤
How many Chinese jīn of concrete are in 1 Japanese gō? The answer is: The change of 1 合 ( Japanese gō ) unit of concrete measure equals = to 0.0087 市斤 ( Chinese jīn ) as the equivalent measure for the same concrete type.
In principle with any measuring task, switched on professional people always ensure, and their success depends on, they get the most precise conversion results everywhere and every-time. Not only whenever possible, it's always so. Often having only a good idea ( or more ideas ) might not be perfect nor good enough solution. If there is an exact known measure in 合 - Japanese gō for concrete amount, the rule is that the Japanese gō number gets converted into 市斤 - Chinese jīn or any other concrete unit absolutely exactly.
Oven info & galleries
- Home Page
- Oven building CDrom details
- Pizza ovens
- New gallery
- Oven meals
- Vintage forum
- Rectangle shape vs. round igloo
- Building details
- Refractory concrete
- Heat resistant mortar
- Concrete cladding layer
- Thermal insulation
- Fire-bricks
- Fire-clay
- Saving money & time
- Good thermometer
- Oven building 1
- Building oven 2