Category: main menu • concrete menu • Japanese gō

concrete conversion

Amount: 1 Japanese gō (合) of volume
Equals: 0.068 stones (st) in mass

Converting Japanese gō to stones value in the concrete units scale.

TOGGLE :   from stones into Japanese gō in the other way around.

concrete from Japanese gō to stone Conversion Results:

Enter a New Japanese gō Amount of concrete to Convert From * Whole numbers, decimals or fractions (ie: 6, 5.33, 17 3/8) * Precision is how many numbers after decimal point (1 - 9)

Enter Amount : Decimal Precision :

CONVERT :   between other concrete measuring units - complete list.

Conversion calculator for webmasters.

Concrete

This general purpose concrete formulation, called also concrete-aggregate (4:1 - sand/gravel aggregate : cement - mixing ratio w/ water) conversion tool is based on the concrete mass density of 2400 kg/m3 - 150 lbs/ft3 after curing (rounded). Unit mass per cubic centimeter, concrete has density 2.41g/cm3. The main concrete calculator page.

The 4:1 strength concrete mixing formula applies the measuring portions in volume sense (e.g. 4 buckets of concrete aggregate, which consists of gravel and sand, with 1 bucket of cement.) In order not to end up with a too wet concrete, add water gradually as the mixing progresses. If mixing concrete manually by hand; mix dry matter portions first and only then add water. This concrete type is commonly reinforced with metal rebars or mesh.

Convert concrete measuring units between Japanese gō (合) and stones (st) but in the other reverse direction from stones into Japanese gō.

conversion result for concrete:
From	Symbol	Result	To	Symbol
1 Japanese gō	合	= 0.068	stones	st

Converter type: concrete measurements

This online concrete from 合 into st converter is a handy tool not just for certified or experienced professionals.

First unit: Japanese gō (合) is used for measuring volume.
Second: stone (st) is unit of mass.

concrete per 0.068 st is equivalent to 1 what?

The stones amount 0.068 st converts into 1 合, one Japanese gō. It is the EQUAL concrete volume value of 1 Japanese gō but in the stones mass unit alternative.

How to convert 2 Japanese gō (合) of concrete into stones (st)? Is there a calculation formula?

First divide the two units variables. Then multiply the result by 2 - for example:
0.068361511367526 * 2 (or divide it by / 0.5)

QUESTION:
1 合 of concrete = ? st

ANSWER:
1 合 = 0.068 st of concrete

Other applications for concrete units calculator ...

With the above mentioned two-units calculating service it provides, this concrete converter proved to be useful also as an online tool for:
1. practicing Japanese gō and stones of concrete ( 合 vs. st ) measuring values exchange.
2. concrete amounts conversion factors - between numerous unit pairs.
3. working with - how heavy is concrete - values and properties.

International unit symbols for these two concrete measurements are:

Abbreviation or prefix ( abbr. short brevis ), unit symbol, for Japanese gō is:
合
Abbreviation or prefix ( abbr. ) brevis - short unit symbol for stone is:
st

One Japanese gō of concrete converted to stone equals to 0.068 st

How many stones of concrete are in 1 Japanese gō? The answer is: The change of 1 合 ( Japanese gō ) unit of concrete measure equals = to 0.068 st ( stone ) as the equivalent measure for the same concrete type.

In principle with any measuring task, switched on professional people always ensure, and their success depends on, they get the most precise conversion results everywhere and every-time. Not only whenever possible, it's always so. Often having only a good idea ( or more ideas ) might not be perfect nor good enough solution. If there is an exact known measure in 合 - Japanese gō for concrete amount, the rule is that the Japanese gō number gets converted into st - stones or any other concrete unit absolutely exactly.

• 
  Jamie and Katrina's brick oven with temperature gauge, in Victoria.
• 
  Baking sourdough breads in quantity in Canada
• 
  Wood oven and meats cold smoker by Reinhard in Clearwater, Florida