All content site-map & Search> Building plans> Building details> Cooking> Firing ovens> Food nutrients> Flour measures> Oven photos>

Category: main menuconcrete menuJapanese hyakume

concrete conversion

Amount: 1 Japanese hyakume (hyakume) of 百目
Equals: 0.011 cubic decimeters (dm3) in volume

Converting Japanese hyakume to cubic decimeters value in the concrete units scale.

TOGGLE :   from cubic decimeters into Japanese hyakume in the other way around.

concrete from Japanese hyakume to cubic decimeter Conversion Results:

Enter a New Japanese hyakume Amount of concrete to Convert From

* Whole numbers, decimals or fractions (ie: 6, 5.33, 17 3/8)
* Precision is how many numbers after decimal point (1 - 9)

Enter Amount :
Decimal Precision :

CONVERT :   between other concrete measuring units - complete list.

Conversion calculator for webmasters.

Concrete

This general purpose concrete formulation, called also concrete-aggregate (4:1 - sand/gravel aggregate : cement - mixing ratio w/ water) conversion tool is based on the concrete mass density of 2400 kg/m3 - 150 lbs/ft3 after curing (rounded). Unit mass per cubic centimeter, concrete has density 2.41g/cm3. The main concrete calculator page.

The 4:1 strength concrete mixing formula applies the measuring portions in volume sense (e.g. 4 buckets of concrete aggregate, which consists of gravel and sand, with 1 bucket of cement.) In order not to end up with a too wet concrete, add water gradually as the mixing progresses. If mixing concrete manually by hand; mix dry matter portions first and only then add water. This concrete type is commonly reinforced with metal rebars or mesh.

Convert concrete measuring units between Japanese hyakume (hyakume) and cubic decimeters (dm3) but in the other reverse direction from cubic decimeters into Japanese hyakume.

conversion result for concrete:
FromSymbolResultToSymbol
1 Japanese hyakume hyakume = 0.011 cubic decimeters dm3

Converter type: concrete measurements

This online concrete from hyakume into dm3 converter is a handy tool not just for certified or experienced professionals.

First unit: Japanese hyakume (hyakume) is used for measuring 百目.
Second: cubic decimeter (dm3) is unit of volume.

concrete per 0.011 dm3 is equivalent to 1 what?

The cubic decimeters amount 0.011 dm3 converts into 1 hyakume, one Japanese hyakume. It is the EQUAL concrete 百目 value of 1 Japanese hyakume but in the cubic decimeters volume unit alternative.

How to convert 2 Japanese hyakume (hyakume) of concrete into cubic decimeters (dm3)? Is there a calculation formula?

First divide the two units variables. Then multiply the result by 2 - for example:
0.011080960451977 * 2 (or divide it by / 0.5)

QUESTION:
1 hyakume of concrete = ? dm3

ANSWER:
1 hyakume = 0.011 dm3 of concrete

Other applications for concrete units calculator ...

With the above mentioned two-units calculating service it provides, this concrete converter proved to be useful also as an online tool for:
1. practicing Japanese hyakume and cubic decimeters of concrete ( hyakume vs. dm3 ) measuring values exchange.
2. concrete amounts conversion factors - between numerous unit pairs.
3. working with - how heavy is concrete - values and properties.

International unit symbols for these two concrete measurements are:

Abbreviation or prefix ( abbr. short brevis ), unit symbol, for Japanese hyakume is:
hyakume
Abbreviation or prefix ( abbr. ) brevis - short unit symbol for cubic decimeter is:
dm3

One Japanese hyakume of concrete converted to cubic decimeter equals to 0.011 dm3

How many cubic decimeters of concrete are in 1 Japanese hyakume? The answer is: The change of 1 hyakume ( Japanese hyakume ) unit of concrete measure equals = to 0.011 dm3 ( cubic decimeter ) as the equivalent measure for the same concrete type.

In principle with any measuring task, switched on professional people always ensure, and their success depends on, they get the most precise conversion results everywhere and every-time. Not only whenever possible, it's always so. Often having only a good idea ( or more ideas ) might not be perfect nor good enough solution. If there is an exact known measure in hyakume - Japanese hyakume for concrete amount, the rule is that the Japanese hyakume number gets converted into dm3 - cubic decimeters or any other concrete unit absolutely exactly.

Conversion for how many cubic decimeters ( dm3 ) of concrete are contained in a Japanese hyakume ( 1 hyakume ). Or, how much in cubic decimeters of concrete is in 1 Japanese hyakume? To link to this concrete Japanese hyakume to cubic decimeters online converter simply cut and paste the following.
The link to this tool will appear as: concrete from Japanese hyakume (hyakume) to cubic decimeters (dm3) conversion.

I've done my best to build this site for you- Please send feedback to let me know how you enjoyed visiting.