Category: main menu • concrete menu • Japanese hyakume

concrete conversion

Amount: 1 Japanese hyakume (hyakume) of 百目
Equals: 0.044 cups Metric (cup mtr. si) in volume

Converting Japanese hyakume to cups Metric value in the concrete units scale.

TOGGLE :   from cups Metric into Japanese hyakume in the other way around.

concrete from Japanese hyakume to cup Metric Conversion Results:

Enter a New Japanese hyakume Amount of concrete to Convert From * Whole numbers, decimals or fractions (ie: 6, 5.33, 17 3/8) * Precision is how many numbers after decimal point (1 - 9)

Enter Amount : Decimal Precision :

CONVERT :   between other concrete measuring units - complete list.

Conversion calculator for webmasters.

Concrete

This general purpose concrete formulation, called also concrete-aggregate (4:1 - sand/gravel aggregate : cement - mixing ratio w/ water) conversion tool is based on the concrete mass density of 2400 kg/m3 - 150 lbs/ft3 after curing (rounded). Unit mass per cubic centimeter, concrete has density 2.41g/cm3. The main concrete calculator page.

The 4:1 strength concrete mixing formula applies the measuring portions in volume sense (e.g. 4 buckets of concrete aggregate, which consists of gravel and sand, with 1 bucket of cement.) In order not to end up with a too wet concrete, add water gradually as the mixing progresses. If mixing concrete manually by hand; mix dry matter portions first and only then add water. This concrete type is commonly reinforced with metal rebars or mesh.

Convert concrete measuring units between Japanese hyakume (hyakume) and cups Metric (cup mtr. si) but in the other reverse direction from cups Metric into Japanese hyakume.

conversion result for concrete:
From	Symbol	Result	To	Symbol
1 Japanese hyakume	hyakume	= 0.044	cups Metric	cup mtr. si

Converter type: concrete measurements

This online concrete from hyakume into cup mtr. si converter is a handy tool not just for certified or experienced professionals.

First unit: Japanese hyakume (hyakume) is used for measuring 百目.
Second: cup Metric (cup mtr. si) is unit of volume.

concrete per 0.044 cup mtr. si is equivalent to 1 what?

The cups Metric amount 0.044 cup mtr. si converts into 1 hyakume, one Japanese hyakume. It is the EQUAL concrete 百目 value of 1 Japanese hyakume but in the cups Metric volume unit alternative.

How to convert 2 Japanese hyakume (hyakume) of concrete into cups Metric (cup mtr. si)? Is there a calculation formula?

First divide the two units variables. Then multiply the result by 2 - for example:
0.04432384180791 * 2 (or divide it by / 0.5)

QUESTION:
1 hyakume of concrete = ? cup mtr. si

ANSWER:
1 hyakume = 0.044 cup mtr. si of concrete

Other applications for concrete units calculator ...

With the above mentioned two-units calculating service it provides, this concrete converter proved to be useful also as an online tool for:
1. practicing Japanese hyakume and cups Metric of concrete ( hyakume vs. cup mtr. si ) measuring values exchange.
2. concrete amounts conversion factors - between numerous unit pairs.
3. working with - how heavy is concrete - values and properties.

International unit symbols for these two concrete measurements are:

Abbreviation or prefix ( abbr. short brevis ), unit symbol, for Japanese hyakume is:
hyakume
Abbreviation or prefix ( abbr. ) brevis - short unit symbol for cup Metric is:
cup mtr. si

One Japanese hyakume of concrete converted to cup Metric equals to 0.044 cup mtr. si

How many cups Metric of concrete are in 1 Japanese hyakume? The answer is: The change of 1 hyakume ( Japanese hyakume ) unit of concrete measure equals = to 0.044 cup mtr. si ( cup Metric ) as the equivalent measure for the same concrete type.

In principle with any measuring task, switched on professional people always ensure, and their success depends on, they get the most precise conversion results everywhere and every-time. Not only whenever possible, it's always so. Often having only a good idea ( or more ideas ) might not be perfect nor good enough solution. If there is an exact known measure in hyakume - Japanese hyakume for concrete amount, the rule is that the Japanese hyakume number gets converted into cup mtr. si - cups Metric or any other concrete unit absolutely exactly.

• 
  Jamie and Katrina's brick oven with temperature gauge, in Victoria.
• 
  Baking sourdough breads in quantity in Canada
• 
  Wood oven and meats cold smoker by Reinhard in Clearwater, Florida