Category: main menu • concrete menu • Stones

concrete conversion

Amount: 1 stone (st) of mass
Equals: 3,584.00 drams (dr) in mass

Converting stone to drams value in the concrete units scale.

TOGGLE :   from drams into stones in the other way around.

concrete from stone to dram Conversion Results:

Enter a New stone Amount of concrete to Convert From * Whole numbers, decimals or fractions (ie: 6, 5.33, 17 3/8) * Precision is how many numbers after decimal point (1 - 9)

Enter Amount : Decimal Precision :

CONVERT :   between other concrete measuring units - complete list.

Conversion calculator for webmasters.

Concrete

This general purpose concrete formulation, called also concrete-aggregate (4:1 - sand/gravel aggregate : cement - mixing ratio w/ water) conversion tool is based on the concrete mass density of 2400 kg/m3 - 150 lbs/ft3 after curing (rounded). Unit mass per cubic centimeter, concrete has density 2.41g/cm3. The main concrete calculator page.

The 4:1 strength concrete mixing formula applies the measuring portions in volume sense (e.g. 4 buckets of concrete aggregate, which consists of gravel and sand, with 1 bucket of cement.) In order not to end up with a too wet concrete, add water gradually as the mixing progresses. If mixing concrete manually by hand; mix dry matter portions first and only then add water. This concrete type is commonly reinforced with metal rebars or mesh.

Convert concrete measuring units between stone (st) and drams (dr) but in the other reverse direction from drams into stones.

conversion result for concrete:
From	Symbol	Result	To	Symbol
1 stone	st	= 3,584.00	drams	dr

Converter type: concrete measurements

This online concrete from st into dr converter is a handy tool not just for certified or experienced professionals.

First unit: stone (st) is used for measuring mass.
Second: dram (dr) is unit of mass.

concrete per 3,584.00 dr is equivalent to 1 what?

The drams amount 3,584.00 dr converts into 1 st, one stone. It is the EQUAL concrete mass value of 1 stone but in the drams mass unit alternative.

How to convert 2 stones (st) of concrete into drams (dr)? Is there a calculation formula?

First divide the two units variables. Then multiply the result by 2 - for example:
3584 * 2 (or divide it by / 0.5)

QUESTION:
1 st of concrete = ? dr

ANSWER:
1 st = 3,584.00 dr of concrete

Other applications for concrete units calculator ...

With the above mentioned two-units calculating service it provides, this concrete converter proved to be useful also as an online tool for:
1. practicing stones and drams of concrete ( st vs. dr ) measuring values exchange.
2. concrete amounts conversion factors - between numerous unit pairs.
3. working with - how heavy is concrete - values and properties.

International unit symbols for these two concrete measurements are:

Abbreviation or prefix ( abbr. short brevis ), unit symbol, for stone is:
st
Abbreviation or prefix ( abbr. ) brevis - short unit symbol for dram is:
dr

One stone of concrete converted to dram equals to 3,584.00 dr

How many drams of concrete are in 1 stone? The answer is: The change of 1 st ( stone ) unit of concrete measure equals = to 3,584.00 dr ( dram ) as the equivalent measure for the same concrete type.

In principle with any measuring task, switched on professional people always ensure, and their success depends on, they get the most precise conversion results everywhere and every-time. Not only whenever possible, it's always so. Often having only a good idea ( or more ideas ) might not be perfect nor good enough solution. If there is an exact known measure in st - stones for concrete amount, the rule is that the stone number gets converted into dr - drams or any other concrete unit absolutely exactly.

• 
  Jamie and Katrina's brick oven with temperature gauge, in Victoria.
• 
  Baking sourdough breads in quantity in Canada
• 
  Wood oven and meats cold smoker by Reinhard in Clearwater, Florida