Category: main menu • firebrick 23% alumina menu • Pennyweights

firebrick 23% alumina conversion

Amount: 1 pennyweight (dwt) of mass
Equals: 0.00041 Japanese kanme (貫目) in mass

Converting pennyweight to Japanese kanme value in the firebrick 23% alumina units scale.

TOGGLE :   from Japanese kanme into pennyweights in the other way around.

firebrick 23% alumina from pennyweight to Japanese kanme Conversion Results:

Enter a New pennyweight Amount of firebrick 23% alumina to Convert From * Whole numbers, decimals or fractions (ie: 6, 5.33, 17 3/8) * Precision is how many numbers after decimal point (1 - 9)

Enter Amount : Decimal Precision :

CONVERT :   between other firebrick 23% alumina measuring units - complete list.

Conversion calculator for webmasters.

Standard firebrick 23% alumina content

Fire Bricks Volume vs. Weight Converter

This standard/medium duty firebrick (23% alumina Al2O3 content) volume versus weight conversion tool is based on the firebrick mass of 1.86 g/cm3 corresponding to 1,860 kg/m3 - 116.12 lbs/cu-ft

Standard type, or in other words, medium duty refractory firebrick is useful for varieties of applications. Different alumina content in firebricks (e.g. in between 38% High Duty and 17% Low Duty firebricks alumina content mark) reflects in different bulk densities plus a few other physical properties and chemical compositions - for the complete list of these, read page refractory firebricks and an article which talks also about additional dense mass stores more heat.

Convert firebrick 23% alumina measuring units between pennyweight (dwt) and Japanese kanme (貫目) but in the other reverse direction from Japanese kanme into pennyweights.

conversion result for firebrick 23% alumina:
From	Symbol	Equals	Result	To	Symbol
1 pennyweight	dwt	=	0.00041	Japanese kanme	貫目

Converter type: firebrick 23% alumina measurements

This online firebrick 23% alumina from dwt into 貫目 converter is a handy tool not just for certified or experienced professionals.

First unit: pennyweight (dwt) is used for measuring mass.
Second: Japanese kanme (貫目) is unit of mass.

firebrick 23% alumina per 0.00041 貫目 is equivalent to 1 what?

The Japanese kanme amount 0.00041 貫目 converts into 1 dwt, one pennyweight. It is the EQUAL firebrick 23% alumina mass value of 1 pennyweight but in the Japanese kanme mass unit alternative.

How to convert 2 pennyweights (dwt) of firebrick 23% alumina into Japanese kanme (貫目)? Is there a calculation formula?

First divide the two units variables. Then multiply the result by 2 - for example:
0.000414713024 * 2 (or divide it by / 0.5)

QUESTION:
1 dwt of firebrick 23% alumina = ? 貫目

ANSWER:
1 dwt = 0.00041 貫目 of firebrick 23% alumina

Other applications for firebrick 23% alumina units calculator ...

With the above mentioned two-units calculating service it provides, this firebrick 23% alumina converter proved to be useful also as an online tool for:
1. practicing pennyweights and Japanese kanme of firebrick 23% alumina ( dwt vs. 貫目 ) measuring values exchange.
2. firebrick 23% alumina amounts conversion factors - between numerous unit pairs.
3. working with - how heavy is firebrick 23% alumina - values and properties.

International unit symbols for these two firebrick 23% alumina measurements are:

Abbreviation or prefix ( abbr. short brevis ), unit symbol, for pennyweight is:
dwt
Abbreviation or prefix ( abbr. ) brevis - short unit symbol for Japanese kanme is:
貫目

One pennyweight of firebrick 23% alumina converted to Japanese kanme equals to 0.00041 貫目

How many Japanese kanme of firebrick 23% alumina are in 1 pennyweight? The answer is: The change of 1 dwt ( pennyweight ) unit of firebrick 23% alumina measure equals = to 0.00041 貫目 ( Japanese kanme ) as the equivalent measure for the same firebrick 23% alumina type.

In principle with any measuring task, switched on professional people always ensure, and their success depends on, they get the most precise conversion results everywhere and every-time. Not only whenever possible, it's always so. Often having only a good idea ( or more ideas ) might not be perfect nor good enough solution. If there is an exact known measure in dwt - pennyweights for firebrick 23% alumina amount, the rule is that the pennyweight number gets converted into 貫目 - Japanese kanme or any other firebrick 23% alumina unit absolutely exactly.

• 
  Jamie and Katrina's brick oven with temperature gauge, in Victoria.
• 
  Baking sourdough breads in quantity in Canada
• 
  Wood oven and meats cold smoker by Reinhard in Clearwater, Florida