Category: main menu • graphite menu • Japanese kanme

graphite conversion

Amount: 1 Japanese kanme (貫目) of mass
Equals: 1.67 cubic decimeters (dm3) in volume

Converting Japanese kanme to cubic decimeters value in the graphite units scale.

TOGGLE :   from cubic decimeters into Japanese kanme in the other way around.

graphite from Japanese kanme to cubic decimeter Conversion Results:

Enter a New Japanese kanme Amount of graphite to Convert From * Whole numbers, decimals or fractions (ie: 6, 5.33, 17 3/8) * Precision is how many numbers after decimal point (1 - 9)

Enter Amount : Decimal Precision :

CONVERT :   between other graphite measuring units - complete list.

Conversion calculator for webmasters.

Graphite Units Converter

The calculator reflects mass density of graphite @ 20 degree Celsius state which is 2.25g/cm3 (calculated not in cold state example 2.09 - 2.23 grams per cubic centimeter.)

Due to its physical properties it is one excellent refractory material. Graphite is lighter in weight in comparison with alumina and still it retains more heat than heavy dense firebricks do. At the same time natural graphite is well abundant on the earth hence, in year 2010, refractory businesses consumed 12,500 tonnes of it only within US.

Convert graphite measuring units between Japanese kanme (貫目) and cubic decimeters (dm3) but in the other reverse direction from cubic decimeters into Japanese kanme.

conversion result for graphite:
From	Symbol	Equals	Result	To	Symbol
1 Japanese kanme	貫目	=	1.67	cubic decimeters	dm3

Converter type: graphite measurements

This online graphite from 貫目 into dm3 converter is a handy tool not just for certified or experienced professionals.

First unit: Japanese kanme (貫目) is used for measuring mass.
Second: cubic decimeter (dm3) is unit of volume.

graphite per 1.67 dm3 is equivalent to 1 what?

The cubic decimeters amount 1.67 dm3 converts into 1 貫目, one Japanese kanme. It is the EQUAL graphite mass value of 1 Japanese kanme but in the cubic decimeters volume unit alternative.

How to convert 2 Japanese kanme (貫目) of graphite into cubic decimeters (dm3)? Is there a calculation formula?

First divide the two units variables. Then multiply the result by 2 - for example:
1.6666666666667 * 2 (or divide it by / 0.5)

QUESTION:
1 貫目 of graphite = ? dm3

ANSWER:
1 貫目 = 1.67 dm3 of graphite

Other applications for graphite units calculator ...

With the above mentioned two-units calculating service it provides, this graphite converter proved to be useful also as an online tool for:
1. practicing Japanese kanme and cubic decimeters of graphite ( 貫目 vs. dm3 ) measuring values exchange.
2. graphite amounts conversion factors - between numerous unit pairs.
3. working with - how heavy is graphite - values and properties.

International unit symbols for these two graphite measurements are:

Abbreviation or prefix ( abbr. short brevis ), unit symbol, for Japanese kanme is:
貫目
Abbreviation or prefix ( abbr. ) brevis - short unit symbol for cubic decimeter is:
dm3

One Japanese kanme of graphite converted to cubic decimeter equals to 1.67 dm3

How many cubic decimeters of graphite are in 1 Japanese kanme? The answer is: The change of 1 貫目 ( Japanese kanme ) unit of graphite measure equals = to 1.67 dm3 ( cubic decimeter ) as the equivalent measure for the same graphite type.

In principle with any measuring task, switched on professional people always ensure, and their success depends on, they get the most precise conversion results everywhere and every-time. Not only whenever possible, it's always so. Often having only a good idea ( or more ideas ) might not be perfect nor good enough solution. If there is an exact known measure in 貫目 - Japanese kanme for graphite amount, the rule is that the Japanese kanme number gets converted into dm3 - cubic decimeters or any other graphite unit absolutely exactly.

• 
  Jamie and Katrina's brick oven with temperature gauge, in Victoria.
• 
  Baking sourdough breads in quantity in Canada
• 
  Wood oven and meats cold smoker by Reinhard in Clearwater, Florida