Category: main menu • graphite menu • Japanese kanme

graphite conversion

Amount: 1 Japanese kanme (貫目) of mass
Equals: 0.0022 cubic yards (cu yd - yd3) in volume

Converting Japanese kanme to cubic yards value in the graphite units scale.

TOGGLE :   from cubic yards into Japanese kanme in the other way around.

graphite from Japanese kanme to cubic yard Conversion Results:

Enter a New Japanese kanme Amount of graphite to Convert From * Whole numbers, decimals or fractions (ie: 6, 5.33, 17 3/8) * Precision is how many numbers after decimal point (1 - 9)

Enter Amount : Decimal Precision :

CONVERT :   between other graphite measuring units - complete list.

Conversion calculator for webmasters.

Graphite Units Converter

The calculator reflects mass density of graphite @ 20 degree Celsius state which is 2.25g/cm3 (calculated not in cold state example 2.09 - 2.23 grams per cubic centimeter.)

Due to its physical properties it is one excellent refractory material. Graphite is lighter in weight in comparison with alumina and still it retains more heat than heavy dense firebricks do. At the same time natural graphite is well abundant on the earth hence, in year 2010, refractory businesses consumed 12,500 tonnes of it only within US.

Convert graphite measuring units between Japanese kanme (貫目) and cubic yards (cu yd - yd3) but in the other reverse direction from cubic yards into Japanese kanme.

conversion result for graphite:
From	Symbol	Equals	Result	To	Symbol
1 Japanese kanme	貫目	=	0.0022	cubic yards	cu yd - yd3

Converter type: graphite measurements

This online graphite from 貫目 into cu yd - yd3 converter is a handy tool not just for certified or experienced professionals.

First unit: Japanese kanme (貫目) is used for measuring mass.
Second: cubic yard (cu yd - yd3) is unit of volume.

graphite per 0.0022 cu yd - yd3 is equivalent to 1 what?

The cubic yards amount 0.0022 cu yd - yd3 converts into 1 貫目, one Japanese kanme. It is the EQUAL graphite mass value of 1 Japanese kanme but in the cubic yards volume unit alternative.

How to convert 2 Japanese kanme (貫目) of graphite into cubic yards (cu yd - yd3)? Is there a calculation formula?

First divide the two units variables. Then multiply the result by 2 - for example:
0.0021799176988573 * 2 (or divide it by / 0.5)

QUESTION:
1 貫目 of graphite = ? cu yd - yd3

ANSWER:
1 貫目 = 0.0022 cu yd - yd3 of graphite

Other applications for graphite units calculator ...

With the above mentioned two-units calculating service it provides, this graphite converter proved to be useful also as an online tool for:
1. practicing Japanese kanme and cubic yards of graphite ( 貫目 vs. cu yd - yd3 ) measuring values exchange.
2. graphite amounts conversion factors - between numerous unit pairs.
3. working with - how heavy is graphite - values and properties.

International unit symbols for these two graphite measurements are:

Abbreviation or prefix ( abbr. short brevis ), unit symbol, for Japanese kanme is:
貫目
Abbreviation or prefix ( abbr. ) brevis - short unit symbol for cubic yard is:
cu yd - yd3

One Japanese kanme of graphite converted to cubic yard equals to 0.0022 cu yd - yd3

How many cubic yards of graphite are in 1 Japanese kanme? The answer is: The change of 1 貫目 ( Japanese kanme ) unit of graphite measure equals = to 0.0022 cu yd - yd3 ( cubic yard ) as the equivalent measure for the same graphite type.

In principle with any measuring task, switched on professional people always ensure, and their success depends on, they get the most precise conversion results everywhere and every-time. Not only whenever possible, it's always so. Often having only a good idea ( or more ideas ) might not be perfect nor good enough solution. If there is an exact known measure in 貫目 - Japanese kanme for graphite amount, the rule is that the Japanese kanme number gets converted into cu yd - yd3 - cubic yards or any other graphite unit absolutely exactly.

• 
  Jamie and Katrina's brick oven with temperature gauge, in Victoria.
• 
  Baking sourdough breads in quantity in Canada
• 
  Wood oven and meats cold smoker by Reinhard in Clearwater, Florida