Category: main menu • graphite menu • Stones

graphite conversion

Amount: 1 stone (st) of mass
Equals: 0.10 Japanese cubic shaku (尺 ^3) in volume

Converting stone to Japanese cubic shaku value in the graphite units scale.

TOGGLE :   from Japanese cubic shaku into stones in the other way around.

graphite from stone to Japanese cubic shaku Conversion Results:

Enter a New stone Amount of graphite to Convert From * Whole numbers, decimals or fractions (ie: 6, 5.33, 17 3/8) * Precision is how many numbers after decimal point (1 - 9)

Enter Amount : Decimal Precision :

CONVERT :   between other graphite measuring units - complete list.

Conversion calculator for webmasters.

Graphite Units Converter

The calculator reflects mass density of graphite @ 20 degree Celsius state which is 2.25g/cm3 (calculated not in cold state example 2.09 - 2.23 grams per cubic centimeter.)

Due to its physical properties it is one excellent refractory material. Graphite is lighter in weight in comparison with alumina and still it retains more heat than heavy dense firebricks do. At the same time natural graphite is well abundant on the earth hence, in year 2010, refractory businesses consumed 12,500 tonnes of it only within US.

Convert graphite measuring units between stone (st) and Japanese cubic shaku (尺 ^3) but in the other reverse direction from Japanese cubic shaku into stones.

conversion result for graphite:
From	Symbol	Equals	Result	To	Symbol
1 stone	st	=	0.10	Japanese cubic shaku	尺 ^3

Converter type: graphite measurements

This online graphite from st into 尺 ^3 converter is a handy tool not just for certified or experienced professionals.

First unit: stone (st) is used for measuring mass.
Second: Japanese cubic shaku (尺 ^3) is unit of volume.

graphite per 0.10 尺 ^3 is equivalent to 1 what?

The Japanese cubic shaku amount 0.10 尺 ^3 converts into 1 st, one stone. It is the EQUAL graphite mass value of 1 stone but in the Japanese cubic shaku volume unit alternative.

How to convert 2 stones (st) of graphite into Japanese cubic shaku (尺 ^3)? Is there a calculation formula?

First divide the two units variables. Then multiply the result by 2 - for example:
0.10142688267096 * 2 (or divide it by / 0.5)

QUESTION:
1 st of graphite = ? 尺 ^3

ANSWER:
1 st = 0.10 尺 ^3 of graphite

Other applications for graphite units calculator ...

With the above mentioned two-units calculating service it provides, this graphite converter proved to be useful also as an online tool for:
1. practicing stones and Japanese cubic shaku of graphite ( st vs. 尺 ^3 ) measuring values exchange.
2. graphite amounts conversion factors - between numerous unit pairs.
3. working with - how heavy is graphite - values and properties.

International unit symbols for these two graphite measurements are:

Abbreviation or prefix ( abbr. short brevis ), unit symbol, for stone is:
st
Abbreviation or prefix ( abbr. ) brevis - short unit symbol for Japanese cubic shaku is:
尺 ^3

One stone of graphite converted to Japanese cubic shaku equals to 0.10 尺 ^3

How many Japanese cubic shaku of graphite are in 1 stone? The answer is: The change of 1 st ( stone ) unit of graphite measure equals = to 0.10 尺 ^3 ( Japanese cubic shaku ) as the equivalent measure for the same graphite type.

In principle with any measuring task, switched on professional people always ensure, and their success depends on, they get the most precise conversion results everywhere and every-time. Not only whenever possible, it's always so. Often having only a good idea ( or more ideas ) might not be perfect nor good enough solution. If there is an exact known measure in st - stones for graphite amount, the rule is that the stone number gets converted into 尺 ^3 - Japanese cubic shaku or any other graphite unit absolutely exactly.

• 
  Jamie and Katrina's brick oven with temperature gauge, in Victoria.
• 
  Baking sourdough breads in quantity in Canada
• 
  Wood oven and meats cold smoker by Reinhard in Clearwater, Florida