Category: main menu • graphite menu • Metric tonnes

graphite conversion

Amount: 1 tonne (Metric) (t) of mass
Equals: 266.67 Japanese kanme (貫目) in mass

Converting tonne (Metric) to Japanese kanme value in the graphite units scale.

TOGGLE :   from Japanese kanme into Metric tonnes in the other way around.

graphite from tonne (Metric) to Japanese kanme Conversion Results:

Enter a New tonne (Metric) Amount of graphite to Convert From * Whole numbers, decimals or fractions (ie: 6, 5.33, 17 3/8) * Precision is how many numbers after decimal point (1 - 9)

Enter Amount : Decimal Precision :

CONVERT :   between other graphite measuring units - complete list.

Conversion calculator for webmasters.

Graphite Units Converter

The calculator reflects mass density of graphite @ 20 degree Celsius state which is 2.25g/cm3 (calculated not in cold state example 2.09 - 2.23 grams per cubic centimeter.)

Due to its physical properties it is one excellent refractory material. Graphite is lighter in weight in comparison with alumina and still it retains more heat than heavy dense firebricks do. At the same time natural graphite is well abundant on the earth hence, in year 2010, refractory businesses consumed 12,500 tonnes of it only within US.

Convert graphite measuring units between tonne (Metric) (t) and Japanese kanme (貫目) but in the other reverse direction from Japanese kanme into Metric tonnes.

conversion result for graphite:
From	Symbol	Equals	Result	To	Symbol
1 tonne (Metric)	t	=	266.67	Japanese kanme	貫目

Converter type: graphite measurements

This online graphite from t into 貫目 converter is a handy tool not just for certified or experienced professionals.

First unit: tonne (Metric) (t) is used for measuring mass.
Second: Japanese kanme (貫目) is unit of mass.

graphite per 266.67 貫目 is equivalent to 1 what?

The Japanese kanme amount 266.67 貫目 converts into 1 t, one tonne (Metric). It is the EQUAL graphite mass value of 1 tonne (Metric) but in the Japanese kanme mass unit alternative.

How to convert 2 Metric tonnes (t) of graphite into Japanese kanme (貫目)? Is there a calculation formula?

First divide the two units variables. Then multiply the result by 2 - for example:
266.66666666667 * 2 (or divide it by / 0.5)

QUESTION:
1 t of graphite = ? 貫目

ANSWER:
1 t = 266.67 貫目 of graphite

Other applications for graphite units calculator ...

With the above mentioned two-units calculating service it provides, this graphite converter proved to be useful also as an online tool for:
1. practicing Metric tonnes and Japanese kanme of graphite ( t vs. 貫目 ) measuring values exchange.
2. graphite amounts conversion factors - between numerous unit pairs.
3. working with - how heavy is graphite - values and properties.

International unit symbols for these two graphite measurements are:

Abbreviation or prefix ( abbr. short brevis ), unit symbol, for tonne (Metric) is:
t
Abbreviation or prefix ( abbr. ) brevis - short unit symbol for Japanese kanme is:
貫目

One tonne (Metric) of graphite converted to Japanese kanme equals to 266.67 貫目

How many Japanese kanme of graphite are in 1 tonne (Metric)? The answer is: The change of 1 t ( tonne (Metric) ) unit of graphite measure equals = to 266.67 貫目 ( Japanese kanme ) as the equivalent measure for the same graphite type.

In principle with any measuring task, switched on professional people always ensure, and their success depends on, they get the most precise conversion results everywhere and every-time. Not only whenever possible, it's always so. Often having only a good idea ( or more ideas ) might not be perfect nor good enough solution. If there is an exact known measure in t - Metric tonnes for graphite amount, the rule is that the tonne (Metric) number gets converted into 貫目 - Japanese kanme or any other graphite unit absolutely exactly.

• 
  Jamie and Katrina's brick oven with temperature gauge, in Victoria.
• 
  Baking sourdough breads in quantity in Canada
• 
  Wood oven and meats cold smoker by Reinhard in Clearwater, Florida